Search Results

Water recovery is essential for long-duration space exploration transit and outpost missions. Primary stage wastewater recovery systems partially satisfy this need, and generate concentrated wastewater brines that are unusable without further processing. The Enhanced Brine Dewatering System (EBDS) is being developed to allow nearly complete recovery of water from Lunar Outpost wastewater brines. This paper describes the operation of the EBDS and discusses the development and testing of the major functional materials, components, and subsystems, including the wastewater brine ersatz formulations that are used in subsystem testing. The assembly progress of the EBDS full system prototype is also discussed, as well as plans for testing the prototype hardware.

The High Efficiency Solid State Lighting with Integrated Adaptive Control (HELIAC) system was developed to independently detect the presence of green plant tissue and to direct light only to those locations. During testing of the HELIAC system, a major factor interfering with effective tissue detection was reflectance of sensed wavebands from the walls and ceiling causing false positives. Since it is desirable to have reflective surfaces to maintain higher light levels with less power, selective reflection systems that absorb some wavebands but reflected others were tested. A test device was fabricated to measure the reflection of red, green, and blue light from a variety of colored mirrors. It was observed that both pink and purple tinted mirrors reduced the reflection of green wavebands more than red and blue wavebands. This effect could also be obtained by using colored films attached to a silvered mirrored surface.

Orbital Technologies Corporation (ORBITEC) utilizes a variety of in-house testing capabilities (vibration, shock, acoustic loads, space vacuum, temperature cycling, humidity, burn-in, etc.) for qualification and screening of flight components. A lunar dust chamber was designed and constructed to include exposure to lunar regolith and dust simulants. A full factorial design of experiment (DOE) was used to investigate the failure modes of electric fans when exposed to airborne JSC-1AF lunar regolith simulant. This type of testing provides valuable insight into reliability predictions, planned maintenance of a system, and component design improvements to mitigate the effects of lunar dust. Incorporating lunar dust exposure testing at an early stage in the design process will help ensure proper system performance and reliability.

A prototype packed bed convective dryer has been studied for use in an energy-efficient closed air-loop heat-pump drying system for astronaut cabin waste. This paper presents a transient continuum model for the heat and mass transfer between the air and wet ersatz trash in the cylindrical drying vessel. The model is based on conservation equations for energy and moisture applied to the air and solid phases and its formulation includes the unique waste characteristic of having both dry and wet solids. It incorporates heat and mass transfer coefficients for the system measured on an ersatz trash in the dryer vessel, and experimentally determined moisture sorption equilibrium relationship for the wet material. The resulting system of differential equations is solved by the finite-volume method as implemented by the commercial software COMSOL. The validated model will be used in the optimization of the entire closed-loop system consisting of dryer, condenser, and heat-recovery modules.

A Plasma Air Decontamination System (PADS) is being developed by ORBITEC for trace contaminant control in spacecraft cabin air, based on non-thermal, atmospheric pressure plasma discharges that generate various highly reactive species that can react with and break down trace air contaminants. It uses a simple and modular design, and may be scaled up or down to meet the requirements of different applications. The prototype PADS reactor has successfully demonstrated removal of ammonia and other selected volatile organic carbons from air, including acetone, ethylbenzene, methane, and methylene chloride. It has the potential to replace the existing high-temperature catalytic oxidizers.

A modular and scalable Dense Medium Plasma Water Purification Reactor was developed, which uses atmospheric-pressure electrical discharges under water to generate highly reactive species to break down organic contaminants and microorganisms. Key benefits of this novel technology include: (i) extremely high efficiency in both decontamination and disinfection; (ii) operating continuously at ambient temperature and pressure; (iii) reducing demands on the containment vessel; and (iv) requiring no consumables. This plasma based technology was developed to replace the catalytic reactor being used in the planned International Space Station Water Processor Assembly.

Humidity control within confined spaces is of great importance for existing NASA environmental control systems and Exploration applications. The Engineered Multifunction Surfaces (MFS) developed in this STTR Phase II form the foundation for a modular and scalable Distributed Humidity Control System (DHCS) while minimizing power, size and mass requirements. Key innovations of the MFS-based DHCS include passive humidity collection, control, and phase separation without moving parts, durable surface properties without particulate generation and accumulation, and the ability to scale up, or network in a distributed manner, a compact, modular device for Exploration applications including space suits, CEV, Rovers, Small and Transit Habitats and Large Habitats.

The wonder of space exploration is a sure way to catch the attention of students of all ages, and space biology is one of many sciences critical to understanding the spaceflight environment. Many systems used in the past for space-to-classroom biology activities have required extensive crew time and material resources, making space-linked education logistically and financially difficult. The new Education Payload Operations Kit C (EPO Kit C) aims to overcome obstacles to space-linked education and outreach by dramatically reducing the resources required for educational activities in plant space biology that have a true spaceflight component. EPO Kit C is expected to be flown from STS-118 to the International Space Station in June 2007. NASA and several other organizations are currently planning an outreach program to complement the flight of EPO Kit C.

The Advanced Animal Habitat (AAH) represents the next generation of Space Station based animal research facilities. Building upon previously developed flight hardware and experience, the AAH offers greatly enhanced system capabilities and performance. The design focuses upon the creation of a robust and flexible platform capable of supporting present and future experimental needs. A modular packaging and distributed control architecture leads to increased system adaptability and expandability. The baseline configuration includes group housing capability for up to six rats with automated food and water delivery as well as waste collection. Animals are continuously monitored with three cameras during both day and night cycles. The animals can be accessed while on-orbit through the Life Sciences Glovebox to perform a wide variety of experimental protocols.

The Advanced Animal Habitat (AAH) and Plant Research Unit (PRU) are two major components of the Space Station Biological Research Project (SSBRP). These two habitats are currently under development by Orbital Technologies Corporation (ORBITEC). Science Evaluation Units (SEUs) have been developed for each of these habitats to allow investigators to plan and test flight experiments on the ground using hardware that is functionally similar to the flight versions of the AAH and PRU. The SEUs also contain key functionality that makes them excellent science tools for general laboratory experiments that are not related to flight experiments.

The VEGGIE unit is a deployable, low-resource plant growth system that can provide a source of fresh food and crew recreation on long duration space missions. VEGGIE can be stowed in 10% of its deployed volume; a single middeck locker equivalent can stow 1.0m2 of growing area. To reduce complexity, VEGGIE utilizes the ambient environment for temperature control and as a source of CO2. The lighting subsystem uses LEDs that provide a minimum light level of 300 µmol m−2s−1, spectral quality control, and a long operating life in a low profile package. The root zone is a compressible fabric mat. Each VEGGIE module has 0.17 m2 of growing area and can be varied in height from 5 to 45 cm. The mass, including the lighting subsystem and root mat, is 4.7 kg. On the ISS, VEGGIE can mount in the aisle, or in an EXPRESS rack.

The ECLSS (Environmentally Controlled Life Support System) project goals are to identify key requirements and guidelines for a Life Support System (LSS) for surface missions based on the Exploration Spirals, to review the various technology options and candidates to fulfill the life support functionality, and to conduct initial trades and assessments at a high level. With the completion of the first six month phase of the project, ORBITEC has generated and shown that for each Exploration Spiral, different LSS architectures are optimal, but when an entire mission model is considered, hybrid systems become more attractive. Also, we can easily show that future spiral requirements should and will influence the technologies and level of closure for earlier spiral developments to reduce overall development and implementation costs, and to increase commonality across the Constellation systems.

Orbital Technologies Corporation (ORBITEC) and the University of Wisconsin (UW) have demonstrated the feasibility of utilizing plasma manufacturing methods to functionalize fluid handling surfaces. Performance of hydrophilic coatings generated with both oxygen plasma and dichlorosilane plasma on aluminum (SiH2Cl2) substrates was demonstrated. Both give similar results, significantly decreasing contact angles and improving wicking ability of machined capillary grooves. Deposition of silver nanoparticles using plasma was also demonstrated and tested. Silver concentrations of 2% were obtained on hydrophilic-coated samples. Testing indicated that the silver-coated samples were biocidal against Listeria monocytogenes. Oxide-coated aluminum substrates were also shown to exhibit biocidal action against L. monocytogenes and a variety of other microorganisms.

The Advanced Animal Habitat (AAH) represents the next generation of Space Station based animal research facilities. Care has been taken to protect the ISS crew from exposure to the hazardous biological materials contained within the AAH. These materials include rat feces, urine, dander, and odor. The approach to containing biological materials relies on collecting the solid and liquid waste, providing physical barriers between the waste and the crew environment, maintaining negative pressure within the specimen environment with respect to the crew environment, and providing odor filtration of air exchanged between the specimen and crew environments. These protections will be in place during all modes of AAH operation.

In-situ resource utilization (ISRU) is an important part of current mission architectures for both a return to the Moon and the eventual human exploration of Mars. ORBITEC has developed and demonstrated an innovative direct energy processing approach for carbon-reduction of lunar and Martian regolith that can operate in a nearly closed-loop manner. Carbon-reduction of regolith produces oxygen and a variety of other useful products, including silicon, iron and glass ceramic materials. In addition, various ISRU propulsion technologies that utilize lunar and Martian resources have been developed and demonstrated. Work is also being conducted with the USDA on techniques to use biomass and waste materials to manufacture items such as shelters, furniture, filters and paper. Atmospheric carbon dioxide on Mars would be used to support the production of biomass in excess of life support needs to be used as the raw material to manufacture useful products on-site.

The CANDS (Circulating, Aeration, and Nutrient Delivery System) Phase II SBIR is currently developing and testing methods and procedures to control moisture, oxygen, and temperature in the root zone of a particulate based micro-gravity nutrient delivery system. The completion of the first year and a half of the CANDS Phase II SBIR has shown significant engineering developments towards environmental control of the root zone. These developments include the measurement of root zone oxygen content, characterization of forced and flood-ebb aeration rates, successful control of root zone moisture using miniature heat-pulse moisture sensors, and successful control of root zone temperature via an insulating/temperature controlling water jacket. At the conclusion of the CANDS Phase II SBIR an integrated root zone environmental control system will be constructed for integration into plant growth systems to eliminate the uncertainties that exist in current plant growth data.

A common question for students to ask educators is “When am I ever going to use this?” An excellent way to answer that question is to demonstrate how interrelated many subjects are. At ORBITEC in Madison, WI, we are developing systems to help teachers demonstrate the exciting interrelationships of science, math and technology using activities related to growing plants in space. We are developing two portable plant growth systems that integrate multiple disciplines, enriching students’ classroom experiences. Each portable growth unit is based on similar principles. The Space Garden and Biomass Production Education System (BPES) are growth units for indoor use that utilize a bellows technology to create a greenhouse-like environment. The Space Garden is a personal growth unit that a student can use individually while the BPES will be 0.25 m2, allowing larger-scale experimentation. The Space Garden will be best used in classrooms of grades four through seven.

Unique challenges arise during the design of temperature and humidity control systems (THCS) for use in microgravity. The design of the Plant Research Unit’s (PRU) THCS builds on the experience gained during the Biomass Production System (BPS) project and extends the understanding of the critical design variables and necessary technical advancements to allow for longer on-orbit operation. Previous systems have been limited by loss of prime, clogging in the porous plates and component reliability. Design of THCSs for long-duration space flight experiments requires the mitigation of these issues as well as a complete understanding of the relevant design variables. In addition to the normal design variables (e.g. mass, power, volume), a complex and interdependent relationship exists between the THCS variables including operational temperature range, operational humidity range, required humidity condensation rate and system air flow.

The objective of the BPS Technology Validation Test (TVT) flown on the ISS as part of Increment 4 was to verify the functionality of environmental control subsystems and to measure the ability of the BPS to support plant growth and development in microgravity. Additional TVT objectives included validation of information acquisition systems, operations and support systems, and component performance. All TVT objectives were successfully addressed. Most evaluation criteria stipulated pre-flight were met. When there were deviations from pre-mission requirements, root causes were identified and subsystem configurations modified to eliminate these problems. Results from the TVT have been applied to the Plant Research Unit development to reduce technical risks and increase reliability. INTRODUCTION

The design of reliable systems is especially important when they are intended for use on the International Space Station (ISS). Limits on crew time and the sensitive nature of experiments being performed require that the systems used to support those experiments have a very low probability of failure. The Plant Research Unit (PRU) has very strict reliability requirements and thus provides a good example of how the challenge of designing reliable systems can be met.