Search Results

This course is verified by Probitas Authentication as meeting the AS9104/3A requirements for continuing Professional Development. This one-day program is designed to provide introductory information for those organizations who are considering transitioning from the Aeronautic, Space and Defense industry to the Food & Drug Administration (FDA), Medical Device Manufacturing market. Reviewing essential information necessary to understand and successfully begin the journey to FDA Medical Device approval, this course will examine many of the controls between the AS9100 Standard and FDA Regulations and identify the similarities.

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). Model-Based Development and Verification (MBDV) technology has been widely accepted in software production. When this technology is used in airborne software, key issues should be considered to ensure airworthiness and safety goals are met. To facilitate the use the MBDV technology, RTCA DO-331 is published as a supplement and guidance support to DO-178C. Because MBDV is regularly used in critical software applications, guidance is needed to apply it to airborne software.

This course is offered in China only and presented in Mandarin Chinese. Sound quality is one of the most important desired attributes for the customers, and road noise is one of the most vital factors influencing sound quality. Road noise is the major interior noise source, especially for EVs, and it is a common customer complaint. In order to improve the customers’ satisfaction and market share, almost all the OEMs have spent lots of sources on the road noise attenuation.

This course is offered in China only and presented in Mandarin Chinese. HMI design is an Interdisciplinary, which is based on human cognitive psychology and combines humanities, sociology, aesthetics, information science and other disciplines. While automotive technologies can be applied regardless of regions, HMI must be localized, as it is closely related to regional culture, people's living habits and characteristics. At the same time, HMI design has its own complete theoretical system, research and design methods and testing methods, instead of relying on experience.

Fastener experts believe that upwards of 95% of all fastener failures are the result of either the wrong fastener for the job or improper installation. Improper installation or incorrect fastener selection can result in catastrophic loss or damage. Learn how to avoid issues by getting the answers in this course.

This 3-day advanced-level course teaches the advanced concepts of GD&T as prescribed in the ASME Y14.5M-1994 Standard. It can be conducted with flexible scheduling, including 5 mornings or 5 afternoons.   

This course is verified by Probitas as meeting the AS9104/3A requirements for Continuing Professional Development. This course serves a dual purpose: it delves into fundamental DFMEA principles and their practical applications while also offering guidance on leading DFMEA teams. Participants will be introduced to crucial FMEA concepts, along with the theoretical foundations before exploring how to implement these concepts in their DFMEA endeavors. Often, the FMEA process can become a mere replication of past efforts, which poses risks for both organizations developing the products under scrutiny and the end-users.

Using tolerance stacks ensures that parts fit together properly, reducing scrap and rework, thereby increasing value. This 3-day advanced-level course includes everything covered in the 2-day foundational-level course. It explains how to use tolerance stacks to analyze product designs and how to use geometric tolerances in stacks.

Using tolerance stacks ensures that parts fit together properly, reducing scrap and rework, thereby increasing value. This 2-day foundational-level course explains how to use tolerance stacks to analyze product designs and how to use geometric tolerances in stacks.

There is a growing interest in the concept of a smart city and how these advanced technologies will improve the quality of living and make a city more attractive to visitors, commerce and industry. This course fills an unmet need for defining and explaining the relationship between connected and autonomous vehicles (CAVs) and smart city transportation. It is apparent that CAVs will achieve the best results when integrated with current and emerging urban infrastructure for transportation. This course addresses such integration from technology, organizational, policy and business model perspectives.

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). Currently in the industry, especially within China, product requirement development is more of an experience-based process rather than a scientific methodology. This course addresses this issue and provides a more process-driven method for better requirement development through the Quality Function Deployment (QFD) methodology.  Real industrial examples are used to demonstrate how to systematically convert the voice of the customer data to engineering specifications using QFD.

This course describes the basic elements of the process for achieving a successful aircraft certification globally once certification by the State of Design has been accomplished. The regulatory framework established under ICAO is presented with discussion of how major countries around the world comply with the ICAO Standards and Recommended Practices (SARPs). The uncertainty of how each country performs validation is a challenge. This course identifies common validation practices and key bilateral agreements which facilitate acceptance of aviation products from one country to another.

Potential regulations surrounding the development, testing and commercial launch of Highly Automated Vehicles and possible liability exposure for the manufacturing and operation of Highly Automated Vehicles are fluid and changing areas, that will continue to evolve over the next several years. The first half of this course reviews where regulations are at the state and federal levels, what actions are currently under consideration, how current regulations will need to change to accommodate HAV’s, and how and when new regulations might be implemented. The second half covers both common law and strict liability and how it may apply to HAV’s.

The automated vehicle industry has been busy designing, developing, and deploying several self driving vehicles and services in the last few years. However, much of the outcomes and the overall outlook of the vehicle and services, such as robotaxis, are not great. Customers and stakeholders complain that the level of automation is low, mostly SAE Levels 1, 2, and very little of Level 3. It appears that Level 4 is far out in the horizon and many wonder if Level 5 is actually achievable.

This course is verified by Probitas Authentication as meeting the AS9104/3A requirements for continuing Professional Development. Why is a design for manufacturing, assembly and automation so important? This introductory course on airframe engineering will cover the importance of design for manufacturing, assembly and automation in aerospace. It will review what the key drivers are for a “good” design and some of the key points for manufacturing and assembly of aircraft components. It will look at how an engineer can combine traditional technologies with new, cutting-edge technologies, to determine the best scenario for success.

Most complex systems are moving toward a “smart” solution, with automated methods for identifying and diagnosing problems. This course will explore how efficient system scan be designed in an effective manner to ensure that they meet performance requirements. Because predictive maintenance is important to the aerospace industry, this course will address systems engineering (SE), review prognostic health management (PHM), and explain how you can utilize them to obtain a better system. Additionally, it will address requirements management; model-based design; and verification and validation.

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). RTCA DO-178C  is the globally-accepted standard for civil aviation software development and certification. Compliance with the objectives of DO-178C is the primary means for meeting airworthiness requirements and obtaining approval of airborne software in TC/STC/TSO, etc. Even after study of the DO-178C, many people lack experience producing DO-178C compliant airborne software in real applications.

The Process FMEA and Control Plan program introduces the basic concepts behind this important tool and provides training in how to conduct an effective PFMEA. First, the course explains what a PFMEA is and how it improves the long-term performance of your products, services and related processes by addressing process related failures. The role of the PFMEA in the overall framework of Quality Management System Requirements is explained as well as the role of the PFMEA in the Advanced Product Quality Planning (APQP) process. Additionally, the differences and relationships between the DFMEA and PFMEA are well defined.

During this DFMEA Overview and Application course, participants will be introduced to important FMEA concepts, the basic theory behind the concepts, then discuss how these concepts can be applied to the customer's design FMEA activities. Participant activities include: reading assignments, group discussions, exercises, building Block Diagrams as a group, and beginning a DFMEA on a customer’s product.

This course is verified by Probitas as meeting the AS9104/3A requirements for Continuing Professional Development. Problems arise in all facets of life. This is particularly true in the business world. Problems impact all aspects of an organization’s operations such as; product development, product quality, process efficiency, marketing efforts, human relations, leadership efforts, financial execution and ultimate profitability. If these problems are not addressed, they inhibit the operation of the business and can eventually result in total failure.