Search Results

Standard

COMPONENT NOMENCLATURE - DUMPERS

1990-07-30

HISTORICAL

J1016_199007

This SAE Standard provides names of major components peculiar to dumpers as defined in SAE J1057 (see Figure 1). Illustrations of components are not intended to be exactly descriptive of any particular machine. For component nomenclature for dumper trailers, refer to SAE J734.

Standard

CAPACITY RATING—DOZER BLADES

1988-03-01

HISTORICAL

J1265_198803

This standard applies only to straight, angling, semi-U, and U-blades for crawler and wheel tractors. It applies to angling blades only in the straight (not angled) position.

Standard

CUTTING EDGE—OPTIONAL CROSS-SECTIONS AND DIMENSIONS LOADER STRAIGHT

1989-09-01

HISTORICAL

J1581_198909

The purpose of this SAE Recommended Practice is to specify dimensions for loader straight cutting edge cross sections without holes and with bolt holes for mounting bolt-on teeth and tooth adaptors on loader buckets described by SAE J731. This recommended practice is intended to supplement SAE J1303 and SAE J1304 with cross sections for heavier duty applications, by identifying larger blunts, greater bevel angles, larger bolt holes, and greater bolt spacing.

Standard

NOMENCLATURE—CRAWLER TRACTOR

1986-01-01

HISTORICAL

J727_198601

This Standard provides names of major components peculiar to crawler tractors as defined in SAE J1057a (June, 1975). Illustrations of components are not intended to be exactly descriptive of any particular machine.

Standard

MACHINE SLOPE OPERATION TEST CODE

1985-10-01

HISTORICAL

J897_198510

This SAE Standard applies to off-road self-propelled construction, forestry and industrial machines as listed in categories 1, 2, and 4 of SAE J1116.

Standard

PRODUCT IDENTIFICATION NUMBERING SYSTEM OF OFF-ROAD WORK MACHINES

1987-09-01

HISTORICAL

J1360_198709

This standard covers off-road, self-propelled work machines (agricultural, construction, forestry, industrial, and mining) as categorized in SAE J1116.

Standard

LOADING ABILITY TEST PROCEDURE—SCRAPERS

1995-08-01

HISTORICAL

J764_199508

This SAE Information Report applies to all independent or combination construction and industrial machines that are designed to scraper-load and transport material. (See SAE J1116 and J1057a.)

Standard

COMPONENT NOMENCLATURE - CONSTRUCTION TWO- AND FOUR-WHEEL TRACTORS

1990-07-30

HISTORICAL

J869_199007

This SAE Standard provides names of major components peculiar to tractors used with scrapers and dumpers. (See Figures 1 to 3.) Reference SAE J1057. Illustrations of components are not intended to be exactly descriptive of any particular machine.

Standard

COMPONENT NOMENCLATURE - DUMPER TRAILER

1990-07-01

HISTORICAL

J734_199007

See the following sections of SAE J1057 for machine identification: See SAE J1016 for additional component nomenclature.

Standard

CAPACITY RATING—SCRAPER, OPEN BOWL

1993-06-01

HISTORICAL

J741_199306

This SAE Standard specifies a procedure for approximating the volume of typical materials contained in the bowl of Open Bowl scrapers as defined in SAE J728 and SAE J1057. The volumes are based on the inside dimensions of the bowl and representative volumes on top of the bowl. This rating method is intended to provide a consistent means of comparing capacities; it is not intended to define actual capacities that might be observed in any specific application.

Standard

DRAG FORCE TEST PROCEDURE FOR CONSTRUCTION, FORESTRY, AND INDUSTRIAL MACHINES

1995-02-01

HISTORICAL

J873_199502

This SAE Standard establishes a test method to measure drag force of self-propelled, as well as towed, construction, forestry, and industrial machines, with or without payload, as listed in SAE J1057 and J1116. Drag force is measured as a function of travel speed.

Standard

Drag Force Test Procedure for Construction, Forestry, and Industrial Machines

2003-09-30

HISTORICAL

J873_200309

This SAE Standard establishes a test method to measure drag force of self-propelled, as well as towed, construction, forestry, and industrial machines, with or without payload, as listed in SAE J/ISO 6165 and J1116. Drag force is measured as a function of travel speed.

Standard

CUTTING EDGE - CROSS SECTIONS LOADER STRAIGHT

1985-02-01

HISTORICAL

J1303_198502

For cutting edges used on buckets for loaders defined in SAE J1057a. The dimensions are applicable to rolled, cast, forged, flame cut, and machined cutting edge sections. Straight cutting edges are defined as those whose leading edge and rear edge are parallel and, thus, are of constant cross section. For "straight cutting edge sections with bolt holes," see SAE J1304 FEB85.

Standard

Identification Terminology of Loaders/Tractors with Forks and Rough Terrain Forklifts

2002-12-19

HISTORICAL

J1464_200212

This SAE Recommended Practice defines machines equipped with forks for material handling, which are intended for use on unimproved or disturbed terrain. (Reference J1116, Categories 1, 2 or 6.)

Standard

IDENTIFICATION TERMINOLOGY OF LOADERS/TRACTORS WITH FORKS AND ROUGH TERRAIN FORKLIFTS

1988-04-01

HISTORICAL

J1464_198804

This recommended practice defines machines equipped with forks for material handling, which are intended for use on unimproved or disturbed terrain. (Reference J1116, Categories 1, 2 or 6.)

Standard

Material Handler Nomenclature and Specifications

2019-04-15

CURRENT

J2506_201904

This SAE Standard establishes terminology and the content of commercial literature specifications for self-propelled crawler and wheeled material handlers, pedestal mounted material handlers and their equipment as defined in 3.1. Illustrations used here are not intended to include all existing commercial machines or to be exactly descriptive of any particular machine. They have been provided to describe the principles to be used in applying this document. (Material handlers share many design characteristics with hydraulic excavators and log loaders; primarily 360 degree continuous rotation of the upperstructure relative to the undercarriage or mounting. They differ in their operating application. Material handlers are used for the handling of scrap material and normally utilize grapples or magnets. Hydraulic excavators are used for the excavation of earth, gravel and other loose material utilizing a bucket.

Standard

CUTTING EDGE—CURVED GRADER

1991-06-01

HISTORICAL

J739_199106

This SAE Standard is intended for curved cutting edge sections used on graders as defined in SAE J870 and J1057. (See Figure 1 and Table 1.) Hole conformation is further defined in SAE J740 and J1580.

Standard

DRAWBAR TEST PROCEDURE FOR CONSTRUCTION, FORESTRY, AND INDUSTRIAL MACHINES

1986-05-01

HISTORICAL

J872_198605

This SAE Standard specifies a test method to measure the drawbar pull performance of self-propelled construction, forestry, and industrial machines and their combinations with mounted and/or trailed equipment, with or without payload, as listed in SAE J1116. It covers the following criteria measured against travel speed: drawbar pull, drawbar power, and wheel or track slip.

Standard

IDENTIFICATION TERMINOLOGY OF EARTHMOVING MACHINES

1988-09-01

HISTORICAL

J1057_198809

This standard identifies earthmoving machines which are intended for use on unimproved surfaces. The machines are used for moving earth and other materials on projects such as road building, dams, open pit excavation, trenching, and buildings. Excluded are machines intended for use on improved surfaces such as "in-plant" material handling, highways, water, air transport, and for agricultural purposes. The parts of the standard are: loaders, dumpers, tractor-scrapers, graders, tractors, excavators, and backhoe loaders. Additional parts will be developed if and when requested.

Standard

COMPONENT NOMENCLATURE—LOADER

1985-02-01

HISTORICAL

J731_198502

This standard includes names of major components and parts peculiar to this type machine. The illustrations are descriptive of the principles and are not intended to include all existing commercial machines. [Refer to SAE J1057 JUL73)—Identification Terminology of Earthmoving Machines for machine type.]