Refine Your Search

Date

Date

Topic

Topic

Alternative fuels Vehicles and equipment On-board energy sources MTC1, Earthmoving Machinery Vehicles, Equipment, and Performance Trucks

Search Results

Viewing 1 to 20 of 70
123Next >Last >>
Sort by published
Standard

Hole Placement on Dozer End Bits
1986-05-01
HISTORICAL
J63_198605
It is the purpose of the SAE Recommended Practice to define the minimum requirements for hole placement on Dozer End Bit supports. The recommended practice applies to straight blade, angling blade, U blade, and semi-U blades used on earthmoving tractors per SAE J1057a up to a maximum weight of 100,000 lb (45,000 kg).
Standard

Hole Placement on Dozer End Bits
1998-05-01
CURRENT
J63_199806
The recommended practice applies to straight blade, angling blade, U blade, and semi-U blades used on earthmoving tractors per SAE J1057a up to a maximum weight of 100,000 lb (45,000 kg).
Standard

Component Nomenclature--Dumpers
2000-06-28
CURRENT
J1016_200006
This SAE Standard provides names of major components peculiar to dumpers as defined in SAE J1057 (See Figure 1). Illustrations of components are not intended to be exactly descriptive of any particular machine. For component nomenclature for dumper trailers, refere to SAE J734.
Standard

COMPONENT NOMENCLATURE - DUMPERS
1990-07-30
HISTORICAL
J1016_199007
This SAE Standard provides names of major components peculiar to dumpers as defined in SAE J1057 (see Figure 1). Illustrations of components are not intended to be exactly descriptive of any particular machine. For component nomenclature for dumper trailers, refer to SAE J734.
Standard

Nomenclature - Rollers and Compactors
2011-10-27
CURRENT
J1017_201110
This SAE Standard provides names of major components peculiar to rollers and compactors. Illustrations of components are not intended to be exactly descriptive of any particular machine. NOTE: Rollers and compactors will be defined in a section added to SAE J1057a.
Standard

Hydraulic Excavator Operator Controls
2019-06-06
CURRENT
J1177_201906
This standard covers mobile hydraulic excavator controls and the specific arrangement and direction of motion for the primary controls. This standard applies to mobile hydraulic excavators as described in ISO 7135—Earthmoving machinery—Hydraulic excavators—Terminology and commercial specifications, and ISO 6165—Earthmoving machinery—Basic types—Vocabulary.
Standard

NOMENCLATURE—HYDRAULIC BACKHOES
1986-03-01
HISTORICAL
J326_198603
This SAE Standard includes hydraulic backhoes which have no more than 190 deg of rotational swing, and are mounted on wheel tractors and crawler tractors. Illustrations used are not intended to include all existing commercial machines or to be exact descriptions of any particular machine. The illustrations have been chosen to describe the principles to be used in applying this standard.
Standard

Nomenclature - Hydraulic Backhoes
2020-03-04
CURRENT
J326_202003
This SAE standard includes hydraulic backhoes which have no more than 190 degrees of rotational swing and are mounted on wheeled tractors and crawler tractors. Illustrations used are not intended to include all existing commercial machines or to be exact descriptions of any particular machine. The illustrations have been chosen to describe the principles to be used in applying this standard.
Standard

HOLE SPACING FOR SCRAPER AND DOZER CUTTING EDGES
1983-05-01
HISTORICAL
J737_198305
This standard is intended for cutting edge sections used on: (1) Tractor-scrapers as described in SAE J1057 and J728. (2) Dozers as described in SAE J173. These cutting edges are further defined in SAE J738 for cross section and SAE J740 for hole conformation.
Standard

Nomenclature--Crawler Tractor
2002-02-21
CURRENT
J727_200202
This Standard provides provides names of major components peculiar to crawler tractors as defined in SAE J1057a (June, 1975). Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Component Nomenclature--Scrapers
2000-06-28
CURRENT
J728_200006
This SAE Standard provides names of major components peculiar to the scraper portion of tractor-scrapers. Reference SAE J1057. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Hole Spacing for Scraper and Dozer Cutting Edges
2007-08-30
CURRENT
J737_200708
This standard is intended for cutting edge sections used on: a. Tractor-scrapers as described in SAE J1057 and J728 b. Dozers as described in SAE J729. These cutting edges are further defined in SAE J738 for cross section and SAE J740 and J1580 for hole conformation. (Note: Some inch dimentions in this standard are not equivalent to the corresponding millimeter figures because values which are widely used have been adapted. This standard specifies hole placement along with length and width of the cutting edge.
Standard

Machine Slope Operation Test Code
2003-05-12
CURRENT
J897_200305
This SAE Standard applies to off-road self-propelled construction, forestry and industrial machines as listed in categories 1, 2, and 4 of SAE J1116. Purpose This Standard provides a field procedure to determine the ability of a machine to operate statically and dynamically on sloping surfaces. Depending upon the objective of the test, any item listed as specified is to be selected at the discretion of either the manufacturer, the test agency, the owner, or a combination of these parties.
Standard

Capacity Rating--Elevating Scrapers
2003-05-12
CURRENT
J957_200305
This SAE Standard specifies a procedure for approximating the volume of a typical material carried in the bowl of an elevating scraper as defined in SAE J728 and SAE J1057. The volumes are based on the inside dimensions of the bowl and a representative volume on top of the bowl. This rating method is intended to provide a consistent means of comparing capacities; it is not intended to define actual capacities that might be observed in any specific application.
Standard

CAPACITY RATING—ELEVATING SCRAPERS
1985-01-01
HISTORICAL
J957_198501
This standard applies to elevating scrapers as defined in SAE J728 and J1057. It is similar to ISO/DIS 6484.
123Next >Last >>
X