Search Results

Training / Education

EV Motor Design Analysis and Test Verification

This course, designed for EV motor engineers and graduate participants, systematically introduces EV motor design analysis and test verification. Combined with engineering practice, it discusses typical EV motor design cases and practical issues related to EV motor technology, aiming to broaden the horizon of EV motor design engineers and improve their problem-solving skills.

Training / Education

Fundamentals and Applications of Electric Motors for Automotive Industries

As the electrification of automobiles is on the rise, it is imperative that the capabilities and limits of the associated devices and systems be understood at a higher level than previously considered adequate. For example, the Tesla Model S has 62 electric motors while the Model X has 70! They propel the vehicle and provide comfort too. Their design must reflect the worst case operating scenarios, duty cycles, environment, country of use and its standards, etc.

Training / Education

DO-178C Basic Training

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). This course is offered in Mandarin Chinese. The course materials are in English and Chinese. RTCA DO-178C is the accepted standard for civil aviation software development and certification, and Chinese civil aviation companies must comply with this standard to meet airworthiness requirements. Participants will attain a basic understanding of the concepts of DO-178C and how it is properly utilized.

Training / Education

Advanced Product Quality Planning

This course is verified by Probitas as meeting the AS9104/3A requirements for Continuing Professional Development. Advanced product quality planning (APQP) is essential to improving the way companies develop products and services.  It is a standardized, universally accepted fundamental business strategy. This strategy is applicable to all types of organizations including manufacturing and service companies, schools, hospitals, and governmental agencies. The aim of APQP is to enable the organization to produce products and provide services focused on satisfying customer’s needs, wants, and expectations.  

Training / Education

EMC Design for PCB Design for New Energy Vehicles

This course is offered in China only and presented in Mandarin Chinese. Developing environmentally cleaner and more fuel efficient vehicles is transforming the automotive industry worldwide. There are many engineering challenges that must be addressed in designing effective new energy vehicles. The technical knowledge required to understand and make the right decisions with regard to powertrain architecture, powertrain controls, and energy management strategies is critical to success in this market.

Training / Education

Role of DER-AR and Airworthiness Certification Process

This four-hour short course will provide an overview of the airworthiness certification process and the role of the FAA Designated Engineering Representative (DER) and Authorized Representative (AR) with insight into the type design, minor/ major Changes, FAA conformity process, and test witnessing. It also provides familiarity with FAA forms.

Training / Education

Design Review Workshop

This course is verified by Probitas Authentication as meeting the AS9104/3A requirements for continuing Professional Development. In today's highly competitive and liability minded environment, Design Reviews (DR) are a must for all major mobility industries such as Automotive, DOD, Aerospace, Agriculture, Recreation, Marine and Rail. While Design Reviews are becoming increasingly important in product liability litigation, they also serve as an effective way to transfer organizational best practices for specific concerns and issues.

Training / Education

Application Development of Electric Vehicles and Hybrid Electric Vehicles Balancing Economic Objectives and Technical Requirements

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese).   More and more stringent emission and fuel consumption regulations are pushing the automotive industry toward electrified powertrain and electrified vehicles. This is particularly evident in China, where there is an increased demand for  (EV) and (HEV). Infrastructure is being built across the country for convenient charging. It must now be determined how to meet the technical targets for EV/HEV regulations under economic constraints and how to best develop the major ePowertrain components (battery and motor).

Training / Education

Fundamentals of GD&T ASME Y14.5M 1994 - Foundational Level

The 2-day foundational-level Fundamentals of GD&T course teaches the terms, rules, symbols, and concepts of geometric dimensioning and tolerancing as prescribed in the ASME Y14.5M-1994 Standard. The class offers an explanation of geometric symbols, including each symbol’s requirements, tolerance zones, and limitations. It compares GD&T to coordinate tolerancing, Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls. Newly acquired learning is reinforced throughout the class with more than 100 practice problems using industrial drawings.

Training / Education

Advanced Concepts of GD&T ASME Y14.5M 1994 - Foundational Level

This 2-day foundational-level course teaches advanced geometric dimensioning and tolerancing topics as prescribed in the ASME Y14.5M-1994 Standard. 

Training / Education

Understanding and Supporting Aircraft Accident Investigation and Reconstruction

Aircraft accident and incident investigations should be supported by all engineering disciplines and departments involved with design, manufacturing, certification, and field operations. For individuals called upon to serve as advisors or technical representatives to official aircraft accident investigation (AAI) teams, an understanding of accident and wreckage reconstruction methodologies and processes is critical to success in this supportive role. This two-day course will begin with basic investigative philosophies and procedures.

Training / Education

Filtration and Contamination Control for Aerospace Hydraulic Systems

This four-hour short course provides an introduction to contamination control principles in aircraft hydraulic systems. Topics covered include an introduction to the types of contamination in aircraft hydraulic systems, contaminant measurement, and reporting methods. In addition, the impact of contamination on hydraulic components is discussed in detail. Along with an introduction to filtration mechanisms, information on testing, rating, and specifying filters will be provided.

Training / Education

Introduction to ISO 90012015 and IATF 169492016

The concept of a Quality System’s approach to business has been employed successfully and sometimes not so successfully for several decades. The International Organization for Standardization (ISO) has been supplying standards that list the key elements/clauses and requirements for building and implementing Quality Systems for over 30 years. These standards are based on the relatively simple concepts of Total Quality Management (TQM), essential principals of management, and a “Process” approach. These standards have been revised several times over the years to make them more realistic and user friendly.

Training / Education

Systems Engineering for Prognostics and Health Management (PHM) Systems

Most complex systems are moving toward a “smart” solution, with automated methods for identifying and diagnosing problems. This course will explore how efficient system scan be designed in an effective manner to ensure that they meet performance requirements. Because predictive maintenance is important to the aerospace industry, this course will address systems engineering (SE), review prognostic health management (PHM), and explain how you can utilize them to obtain a better system. Additionally, it will address requirements management; model-based design; and verification and validation.

Training / Education

The Nature of Automated Vehicle Safety Will SAE Level 5 Ever Be Achieved?

The automated vehicle industry has been busy designing, developing, and deploying several self driving vehicles and services in the last few years. However, much of the outcomes and the overall outlook of the vehicle and services, such as robotaxis, are not great. Customers and stakeholders complain that the level of automation is low, mostly SAE Levels 1, 2, and very little of Level 3. It appears that Level 4 is far out in the horizon and many wonder if Level 5 is actually achievable.

Training / Education

A Primer on Regulations and Liability Considerations for HAV’s

Potential regulations surrounding the development, testing and commercial launch of Highly Automated Vehicles and possible liability exposure for the manufacturing and operation of Highly Automated Vehicles are fluid and changing areas, that will continue to evolve over the next several years. The first half of this course reviews where regulations are at the state and federal levels, what actions are currently under consideration, how current regulations will need to change to accommodate HAV’s, and how and when new regulations might be implemented. The second half covers both common law and strict liability and how it may apply to HAV’s.

Training / Education

Navigating Requirements for International Certification of Aviation Products

This course describes the basic elements of the process for achieving a successful aircraft certification globally once certification by the State of Design has been accomplished. The regulatory framework established under ICAO is presented with discussion of how major countries around the world comply with the ICAO Standards and Recommended Practices (SARPs). The uncertainty of how each country performs validation is a challenge. This course identifies common validation practices and key bilateral agreements which facilitate acceptance of aviation products from one country to another.

Training / Education

Quality Function Deployment Transforming Voice of the Customer into Engineering Specifications

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). Currently in the industry, especially within China, product requirement development is more of an experience-based process rather than a scientific methodology. This course addresses this issue and provides a more process-driven method for better requirement development through the Quality Function Deployment (QFD) methodology.  Real industrial examples are used to demonstrate how to systematically convert the voice of the customer data to engineering specifications using QFD.

Training / Education

Methodology of Interactive Design and Study Using Driving Simulator

This course is offered in China only and presented in Mandarin Chinese. Driving simulator is a key component of automotive interactive design, which can provide objective data to support both the effectiveness of design and user experience. On the other hand, driving simulator and the design of its experiments are major challenges, as improper experiment design will lead to consequences such as failure in identifying designing errors of the interactive design itself.

Training / Education

Model-Based Engineering Overview for Systems Management Practitioners

Use of Model-Based Systems Engineering (MBSE) has been growing across industry, extending beyond defense and aerospace to include various commercial enterprises such as automotive and healthcare. Tool vendors are quick to point out benefits of this model-based approach and practices but are not always clear how MBSE benefits can be realized on a project. When deployed successfully, several key considerations should be addressed that maximize the value for a use-case. This four-hour class will discuss the nature and purpose of the MBSE approach and how key information is used for successful MBSE deployment as it relates to Systems Management.