Search Results

With growing demands for better fuel economy and reduced carbon emissions there is a need for smaller and more fuel efficient engines. At the same time, to improve passenger comfort there are also demands placed on improved vehicle quietness [1]. A Homogeneous Charge Compression Ignition (HCCI) system or a higher compression ratio system can be used to obtain better fuel economy but the enhanced combustion rate causes an increase in engine vibration in the medium to high frequency range [2, 3]. To ensure vehicle quietness, this issue of structure-borne noise that is transmitted from the engine mounts to the body must be addressed. In this paper a simple anti-vibration active mount system is introduced that can significantly reduce structure-borne noise at medium to high frequencies. This is achieved by adding mass to the insulator which leads to resonance at lower frequencies, in order to obtain double anti-vibration performance.

This paper describes the performance evolution and key breakthroughs of the world's first one-motor two-clutch (1M2CL) parallel full hybrid system without a torque converter that was developed and implemented on a hybrid luxury sedan in November 2010. The high potential of this hybrid system was brought out further to improve fuel economy without sacrificing acceleration performance. The resultant second generation of the 1M2CL parallel full hybrid system was applied to a hybrid premium sports sedan in August 2013. In order to improve these performance attributes, the following key technical measures were adopted: 1 Motor torque during the EV mode was increased to expand the EV drive region. 2 Maximum motor torque and battery power at engine startup were boosted to reduce the engine start time. 3 Integrated control of the motor and clutches was improved. 4 Mechanical efficiencies were improved for higher fuel economy.

A new highly biofidelic side impact dummy, the WorldSID 50th percentile male, has been developed under the supervision of the International Organization for Standardization in order to harmonize a number of existing side impact dummies in one single dummy. Momentum is growing for using the WorldSID in safety tests in the EU and the US. In the present study, two Euro-NCAP pole side impact tests were conducted to compare ES-2 and WorldSID responses in a mid-size SUV with respective seating positions as stipulated in the Euro-NCAP test conditions and fitted with the same side airbag. It was found that, compared with ES-2, the chest, abdomen and pelvis accelerations of WorldSID are more sensitive to variation in the applied external load transmitted by the deployed side airbag and door intrusion.

Implementation of appropriate safety measures, either from the viewpoint of a vehicle or the society or the infra-structure, it is an important issue to clearly understand the multi-dimension complicated real world accident scenarios. This study proposes a new method to easily capture and to extract the essence of such complicated multi-dimension mutual relationship by visualizing the results of SOM (Self Organizing Map). The FARS data from 2010 is used to generate a dataset comprised of 16,180 fatal passenger car drivers and 48 variables. The 16,180 fatal drivers were clustered using hierarchy cluster analysis method and mapped into a two-dimensional square with one dot representing one fatal driver using SOM.

In order to satisfy environmental regulations while maintaining strong performance and excellent fuel economy, advanced diesel engines are employing sophisticated air breathing systems. These include high pressure and low pressure EGR (Hybrid EGR), intake and exhaust throttling, and variable turbine geometry systems. In order to optimize the performance of these sub-systems, system level controls are necessary. This paper presents the design, benefits and test results of a model-based air system controller applied to an automotive diesel engine.

High-voltage nanosecond gas discharge has been shown to be an efficient way to ignite ultra-lean fuel air mixtures in a bulk volume, thanks to its ability to produce both high temperature and radical concentration in a large discharge zone. Recently, a feasibility study has been carried out to study plasma-assisted ignition under high-pressure high-temperature conditions similar to those inside an internal combustion engine. Ignition delay times were measured during the tests, and were shown to be decreasing under high-voltage plasma excitation. The discharge allowed instant control of ignition, and specific electrode geometry designs enabled volumetric ignition even at high-pressure conditions.

A correct prediction of the initial stages of the combustion process in SI engines is of great importance to understand how local flow conditions, fuel properties, mixture stratification and ignition affect the in-cylinder pressure development and pollutant formation. However, flame kernel growth is governed by many interacting processes including energy transfer from the electrical circuit to the gas phase, interaction between the plasma channel and the flow field, transition between different combustion regimes and gas expansion at very high temperatures. In this work, the authors intend to present a comprehensive, multi-dimensional model that can be used to predict the initial combustion stages in SI engines. In particular, the spark channel is represented by a set of Lagrangian particles where each one of them acts as a single flame kernel.

This paper describes a newly developed electrified powertrain that incorporates various energy-saving improvements and is intended for use on a 2013 model year EV. Based on a 2011 model year EV that was specifically designed and engineered as a mass-produced EV, this powertrain integrates the traction motor, inverter and charging unit to achieve a smaller, lighter package for expanding application to more vehicles. Integration of the motor and inverter in particular reduced the part count for enhanced assembly ease, in addition to reducing heat transfer, noise and vibration. The specific features described in the paper are the three points below. Improving the layout of the inverter parts in order to downsize and integrate the inverter with the motor. Reducing the transfer of heat from the motor to the inverter. Reducing the excitation forces of the motor and optimizing the inverter for noise and vibration.

Logistic regression analysis for accident cases of NASS-PCDS (National Automotive Sampling System-Pedestrian Crash Data Study) clearly shows that the extent and the degree of pedestrian's lower extremity injury depend on various factors such as the impact speed, the ratio of the pedestrian height to that of the bonnet leading edge (BLE) of the striking vehicle, bumper to knee ratio, bumper lead angle, age of the pedestrian, and posture of the pedestrian at the time of impact. The pedestrian population is divided in 3 groups, equivalent to small-shorter, medium-height and large-taller pedestrian with respect to the “pedestrian to BLE height-ratio” in order to quantify the degree of influence of lower leg injuries in each group. Large adult male finite element model (95th percentile male: 190 cm and 103 kg) was developed by morphing the Japan Automobile Manufacturers Association (JAMA) 50th percentile male.

This paper describes the development of high efficiency and compact bumper recycling equipment for facilitating bumper recycling globally. Various equipment to remove paint coat from bumper has been developed since 90s', using mechanical, physical or chemical method. However, it is difficult to promote bumper recycling without realizing cost effective overall system from paint coat removal to pelletizing. Our company jointly developed method of mechanically removing paint coat and has committed to bumper recycling in the form of outsourcing since 2000. In 2010, a dedicated plant for recycling bumpers was launched on the premises of our Oppama Assembly Plant in Japan. In the future, promoting bumper recycling at other overseas assembly plants is necessary as vehicle production will expand globally.

A comprehensive analysis was performed to evaluate the effect of BMI on different body region injuries for side impact. The accident data for this study was taken from the National Automotive Sampling System-Crashworthiness Data System (NASS-CDS). It was found that the mean BMI values for driver and front passengers increases over the years in the US. To study the effect of BMI, the range was divided into three groups: Thin (BMI<21), Normal (BMI 24-27) and Obese (BMI>30). Other important variables considered for this study were model year (MY1995-99 for old vehicles & MY2000-08 for newer vehicles), impact location (side-front F, side-center P & side-distributed Y) and direction of force (8-10 o'clock for nearside & 2-4 o'clock for far-side). Accident cases involving older occupants above 60 years was omitted in order to minimize the bone strength depreciation effect. Results of the present study indicated that the Model Year has influence on lower extremity injuries.

A logistic regression analysis of accident cases in the NASS-PCDS (National Automotive Sampling System-Pedestrian Crash Data Study) database clearly shows that pedestrian pelvis injuries tend to be complex and depend on various factors such as the impact speed, the ratio of the pedestrian height to that of the bonnet leading edge (BLE) of the striking vehicle, and the gender and age of the pedestrian. Adult female models (50th %ile female AF50: 161 cm and 61 kg; 5th %ile female AF05: 154 cm and 50 kg) were developed by morphing the JAMA 50th %ile male AM50 and substituting the pelvis of the GHBMC AM50 model. The fine-meshed pelvis model thus obtained is capable of predicting pelvis fractures. Simulations conducted with these models indicate that the characteristics of pelvis injury patterns in male and female pedestrians are influenced by the hip/BLE height ratio and to some extent by the pelvis bone shape.

The “Car of the Future” project converted a production 2015 rear-wheel-drive (RWD) Subaru BRZ into a series hybrid electric vehicle (HEV) with an intermediate milestone of a battery electric vehicle (BEV). This intermediate BEV step provided a point at which the vehicle could be evaluated in its all-electric operation with the absence of what were once critical components, including its original powertrain and powertrain electronics. This paper selects an appropriate electric machine that will meet the desired requirements for the “Car of the Future” BEV milestone. Vehicle technical specifications (VTS), which define critical vehicle requirements, were provided by the sponsor and adjusted to align with common requirement criteria such as acceleration and gradeability.

This paper presents a study of a cooled exhaust gas recirculation (EGR) system applied to a turbocharged gasoline engine for improving fuel economy. The use of a higher compression ratio and further engine downsizing have been examined in recent years as ways of improving the fuel efficiency of turbocharged gasoline engines. It is particularly important to improve fuel economy under high load conditions, especially in the turbocharged region. The key points for improving fuel economy in this region are to suppress knocking, reduce the exhaust temperature and increase the specific heat ratio. There are several varieties of cooled EGR systems such as low-pressure loop EGR (LP-EGR), high-pressure loop EGR (HP-EGR) and other systems. The LP-EGR system was chosen for the following reasons. It is possible to supply sufficient EGR under a comparatively highly turbocharged condition at low engine speed.

Propulsion system control algorithms covering the functional needs of xEV propulsion (‘x’ donates P0-P4 configurations) systems are presented in this paper. The scope and foundation are based on generic well-established HEV controller architectures. However, unlike conventional HEV (series, parallel and power split) powertrains, the next generation of integrated electric propulsion configurations will utilize a single micro controller that supports multiple control functions ranging from the electric machines, inverters, actuators, clutch solenoids, coolant pumps, etc. This presents a unique challenge to architect control algorithms within the AUTOSAR framework while satisfying the complex timing requirements of motor/generator-inverter (MGi) control and increased interface definitions between software components to realize functional integration between the higher level propulsion system and its sub-systems.

In recent years, electrification of vehicle powertrains has become more mainstream to meet regulatory fuel economy and emissions requirements. Amongst the many challenges involved with powertrain electrification, developing supervisory controls and energy management of hybrid electric vehicle powertrains involves significant challenges due to multiple power sources involved. Optimizing energy management for a hybrid electric vehicle largely involves two sets of tasks: component level or low-level control task and supervisory level or high-level control task. In addition to complexity within powertrain controls, advanced driver assistance systems and the associated chassis controls are also continuing to become more complex. However, opportunities exist to optimize energy management when a cohesive interaction between chassis and powertrain controls can be realized.

Dihydrogen, as a zero CO2 fuel, is a strong candidate for internal combustion engine to limit global warming. This study shows the impact of standard tuning parameters on mixture homogeneity and combustion characteristics. A 2.2L Diesel engine on which the head was reworked to allow side mounted direct injector and central mounted spark plug was selected. The discussed tests were made at low engine speed and partial load. A spark advance sweep at different air-fuel ratios (λ) was conducted. The exponential relation between λ and NOx emissions is highly marked and extremely low NOx emissions up to 1.7 g/kWh at minimum spark advance for maximum brake torque can be measured. A λ sweep was performed at different starts of injection (SOI). The results show that, depending on the engine speed, a later SOI might lead to lower NOx emissions. For a λ setpoint of 1.8, at 1500 rpm, late SOI leads to 30% higher NOx emissions where at 2500 rpm these emissions are 26% lower.

The global automotive industry is undergoing a significant transition as battery electric vehicles enter the market and diesel sales decline. It is widely recognized that internal combustion engines (ICE) are needed for transport for years to come, however, demands on fuel efficiency, emissions, cost, and performance are extremely challenging. Gasoline compression ignition (GCI) is one approach to achieving demanding future efficiency and emissions targets. A key technology enabler for GCI is partially premixed, compression ignition (PPCI) combustion, which involves two high-pressure, late, fuel injections during the compression stroke. Both NOx and smoke emissions are greatly reduced relative to diesel engines, and this reduces aftertreatment (AT) requirements significantly. Exhaust rebreathing (RB) is used for robust low-load and cold operation. This is enabled by use of 2-Step, mode switching rocker arms to allow switching between rebreathe and normal combustion modes.