Search Results

Two campaigns measuring on-road emissions of 23 VN-trucks on a randomly chosen driving cycle, consisting of 10 miles two-lane and 8 miles four-lane road were performed. The first, during October 2004, showed tailpipe NOx emissions on fleet average of 1.06 g/bhp-hr including the time the exhaust gas temperature was below 200°C. The second, during June 2005, showed tailpipe NOx emissions on fleet average of 1.13 g/bhp-hr including the time the exhaust gas temperature was below 200°C. Complementary measurements in a SET-cycle (13 point OICA-cycle) on a chassis dynamometer showed a tailpipe emission of 0.008 g PM per bhp-hr. Moreover, cost analysis show that the diesel fuel consumption remains unchanged whether the truck running on ULSD is equipped with a Combined Exhaust gas AfterTreatment System (CEATS) installed or not.

On-road emission measurements of 23 VN-trucks on a randomly chosen driving cycle, consisting of 10 miles two-lane and 8 miles four-lane road, showed tailpipe NOx emissions on fleet average of 0.96 g/bhp-hr, or 1.06 g/bhp-hr when including the time the exhaust gas temperature was below 200°C. Complementary measurements in a SET-cycle (13 point OICA -cycle) on a chassis dynamometer showed a tailpipe emission of 0.008 g PM per bhp-hr. Moreover, cost analysis show that the diesel fuel consumption remains unchanged whether the truck running on ULSD is equipped with a Combined Exhaust gas AfterTreatment System (CEATS) installed or not.

This paper reviews field test results in 23 Volvo D12C non-Exhaust Gas Recirculation (EGR) diesel engines using continuously regenerating Diesel Particulate Filter (DPF) with Selective Catalytic Reduction (SCR) and ultra low sulfur diesel fuel at 4-10 ppm. This 2-year field test provided an opportunity to measure on-road nitrogen oxide (NOx) emissions, and to do in-depth analysis of the incombustible material remaining in the filters. In addition, two crankcase oils were used at 1.0% and 1.4% sulfated ash to provide enhanced information on the material collected in the filters, and on oil drain capability. The study demonstrates that the U.S. Environmental Pro-tection Agency (EPA) 2007 emissions can be met. After 2 years in the field the 23 trucks using the DPF-SCR system are still providing a very high NOx conversion of 75% on fleet average. The filter material contained only 2 wt-% carbon, which demonstrates the effectiveness of the DPF-SCR system in combusting soot.