Search Results

An ultrasonic air temperature sensor, intended to help improve automatic climate control (ACC), has been demonstrated in a vehicle. Ideally, ACC should be based on inputs correlated with thermal comfort. Current ACC systems do not measure the air temperature best correlated to thermal comfort - at breath level in front of an occupant. This limits the thermal comfort that ACC can provide under transient conditions. An ultrasonic sensor measures the bulk air temperature, is transparent to the driver, and can use commercially available components. In a proof-of-concept test, we monitored the thermal transients in a vehicle during cool-down after a hot soak and also during warm-up after a cold soak. The ultrasonic path was along the roof console. The ultrasonic temperature always agreed to ±1 °C with the air temperature measured by a thermocouple at the midpoint of the ultrasonic path.

A methodology for measuring oil viscosity in an internal combustion engine has been developed that is based on measured values of oil pressure and oil temperature at a relatively low engine speed near idle. Engine oil pressure results from the resistance of the oil to flow under the pumping action of the oil pump. The resistance to flow, in turn, is a function of both the viscosity of the oil and the flow rate. At a constant oil flow rate, a higher oil viscosity will result in a higher oil pressure. Oil viscosity is an important factor in determining the ability of the oil to provide effective lubrication and, for example, can be used as an indicator of the need to change the oil. This report describes the operational principles of the methodology for determining engine oil viscosity and a proof of concept based on a simple vehicle test.

The major challenge in diesel NOx aftertreatment systems using NOx adsorbers is their susceptibility to sulfur poisoning. A new computational model has been developed for the thermal management of NOx adsorber desulfation and describes the exothermic reaction mechanisms on the catalyst surface in the diesel NOx trap. Sulfur, which is present in diesel fuel, adsorbs as sulfates and accumulates at the same adsorption sites as NOx, therefore inhibiting the ability of the catalyst to adsorb NOx. Typically, a high surface temperature above 650 °C is required to release sulfur rapidly from the catalyst [1]. Since the peak temperatures of light-duty diesel engine exhaust are usually below 400 °C, additional heat is required to remove the sulfur. This report describes a new mathematical model that employs Navier-Stokes equations coupled with species transportation equations and exothermic chemical reactions.

Simulation of passenger compartment climatic conditions is becoming increasingly important as a complement to wind tunnel and field testing to help achieve improved thermal comfort while reducing vehicle development time and cost. Thermal analysis of a passenger compartment involves not only geometric complexity but also strong interactions between airflow and three modes of heat transfer, namely, heat conduction, convection, and thermal radiation. The present full 3-D CFD analysis takes into account the geometrical configuration of the passenger compartment including glazing surfaces and pertinent physical and thermal properties of the enclosure with particular emphasis on glass properties. This CFD analysis is coupled with a thermal comfort model in the Virtual Thermal Comfort Engineering (VTCE) Process that was described in [1].