Search Results

This paper describes a bumper system design that satisfies both current FMVSS legislation as well as the European Enhanced Vehicle Safety Committee (EEVC) requirements for lower leg pedestrian impact protection. The dual performance solution is achieved through a combination of material properties and design. Using Computer Aided Engineering (CAE) modeling, the performance of an injection molded energy absorber (EA) was analyzed for pedestrian protection requirements of knee bending angle, knee shear displacement, and tibia acceleration, 4Kph pendulum and barrier impacts (ECE42, FMVSS), and 8Kph pendulum and barrier impacts (CMVSS, FMVSS). The results demonstrate how an injection molded EA using polycarbonate/polybutyelene terephthalate (PC/PBT) resin (Figure 1) can meet both FMVSS and pedestrian safety requirements and can do so within a packaging space typical of today's vehicle styling.

An Instrument Panel (IP) cockpit is one of the most complex vehicle systems, not only because of the large number of components, but also because of the numerous design variations available. The OEM can realize maximum benefit when the IP cockpit is assembled as a module. This requires increased performance attributes including safety, durability, and thermal performance, while meeting styling and packaging constraints, and optimizing the program imperatives of mass and cost. The design concept discussed in this paper consists of two main injection molded parts that are vibration welded to form a stiff structure. The steering column is attached to the cowl and plastic structure by a separate steel column support. The plastic IP structure with integrated ducts is designed and developed to enable the IP cockpit to be a modular system while realizing the benefits of mass and cost reduction.

The aesthetic requirements for rear combination lamps have risen due to the increased use of optic free lens. The objective of this study was to develop a methodology to characterize the relative aesthetic performance for thermoplastic resins utilized for rear combination lamp housings. This study focuses upon the use of a direct metallization process. The results of this study will allow project engineers to better understand the relative performance of various materials.

Automobile headlamps are highly controlled products that must meet various performance standards to be commercialized. The combination of the bulb and lens must emit acceptable color and light output. Commercially available headlamps use different types of bulbs but usually a clear or slightly tinted lens. In the past few years, high performance bulbs have been used. These are known as HID or xenon lamps and are characterized by their bluer color compared to standard halogen bulbs. This paper explores some of the possibilities that new lens material can offer in terms of design and aesthetics with little or no impact on lighting performance as tested per the Society of Automotive Engineers (SAE) J1383 [1]. Light stability of these new lens materials is also discussed.

The automotive industry is continually striving for opportunities to take additional cost and mass out of vehicle systems. Large parts such as an Instrument Panel retainer are good candidates because a small percent reduction in mass can translate into a significant material mass savings. Multiple requirements for a soft instrument panel including safety, stiffness, adhesion, etc. can make these savings difficult to achieve. This paper will describe how a new material and process development for the fabrication of a soft instrument panel can produce 50% weight savings with a 20% cost reduction potential. In addition, this new technology exhibits improved performance over existing materials during safety testing.

A model has been developed and implemented at GE Plastics that predicts a material's color shift when weathered. The material's color shift is due to the summation of color shifts from each individual component. By individually measuring the change in each component's optical coefficients upon weathering and using a multiple light scattering model, one can predict the color shift of a material composed of mixtures of these components. The model has been shown to have a standard deviation of 0.4 to 0.9 when predicting color shifts E*, for PC-polyester copolymers, ABS, and ABS/PC blends using an automotive exterior test, SAE J1885, ASTM D 4674, and ASTM D 4459.

Current accelerated weathering protocols such as SAE J1960 or ASTM G26 do not provide reliable, predictive results for engineering thermoplastics. Correlation factors among resin types and even different colors of a single resin have variations that are 60-100% of the mean at the 95% confidence level, making these tests useless for lifetime prediction or even reliable ranking of materials. We have developed improved conditions using CIRA/sodalime-filtered xenon arc, a more rain-like water spray, and occasional sponge-wiping of the samples. The data for gloss loss and color shift agree very well with Florida data giving a correlation factor of 3100±680 kJ/m2 (at 340 nm) per Florida year at the 95% confidence level. The acceleration factor is 7.6x.