Search Results

When a vehicle with protruding wheel studs makes contact with another vehicle or object in a sideswipe configuration, the tire sidewall, rim and wheel studs of that vehicle can deposit distinct geometrical damage patterns onto the surfaces it contacts. Prior research has demonstrated how relative speeds between the two vehicles or surfaces can be calculated through analysis of the distinct contact patterns. This paper presents a methodology for performing this analysis by visually modeling the interaction between wheel studs and various surfaces, and presents a method for automating the calculations of relative speed between vehicles. This methodology also augments prior research by demonstrating how the visual modeling and simulation of the wheel stud contact can extend to almost any surface interaction that may not have any previous prior published tests, or test methods that would be difficult to setup in real life.

This paper presents yaw testing of vehicles with tread removed from tires at various locations. A 2004 Chevrolet Malibu and a 2003 Ford Expedition were included in the test series. The vehicles were accelerated up to speed and a large steering input was made to induce yaw. Speed at the beginning of the tire mark evidence varied between 33 mph and 73 mph. Both vehicles were instrumented to record over the ground speed, steering angle, yaw angle and in some tests, wheel speeds. The tire marks on the roadway were surveyed and photographed. The Critical Speed Formula has long been used by accident reconstructionists for estimating a vehicle’s speed at the beginning of yaw tire marks. The method has been validated by previous researchers to calculate the speed of a vehicle with four intact tires. This research extends the Critical Speed Formula to include yawing vehicles following a tread detachment event.

This paper reports testing and analysis of the braking and swerving capabilities of on-road, three-wheeled motorcycles. A three-wheeled vehicle has handling and stability characteristics that differ both from two-wheeled motorcycles and from four-wheeled vehicles. The data reported in this paper will enable accident reconstructionists to consider these different characteristics when analyzing a three-wheeled motorcycle operator’s ability to brake or swerve to avoid a crash. The testing in this study utilized two riders operating two Harley-Davidson Tri-Glide motorcycles with two wheels in the rear and one in the front. Testing was also conducted with ballast to explore the influence of passenger or cargo weight. Numerous studies have documented the braking capabilities of two-wheeled motorcycles with riders of varying skill levels and with a range of braking systems.