Search Results

This paper presents a methodology for generating photo realistic computer simulation environments of nighttime driving scenarios by combining nighttime photography and videography with video tracking [1] and projection mapping [2] technologies. Nighttime driving environments contain complex lighting conditions such as forward and signal lighting systems of vehicles, street lighting, and retro reflective markers and signage. The high dynamic range of nighttime lighting conditions make modeling of these systems difficult to render realistically through computer generated techniques alone. Photography and video, especially when using high dynamic range imaging, can produce realistic representations of the lighting environments. But because the video is only two dimensional, and lacks the flexibility of a three dimensional computer generated environment, the scenarios that can be represented are limited to the specific scenario recorded with video.

There are numerous publically available smart phone applications designed to track the speed and position of the user. By accessing the phones built in GPS receivers, these applications record the position over time of the phone and report the record on the phone itself, and typically on the application’s website. These applications range in cost from free to a few dollars, with some, that advertise greater functionality, costing significantly higher. This paper examines the reliability of the data reported through these applications, and the potential for these applications to be useful in certain conditions where monitoring and recording vehicle or pedestrian movement is needed. To analyze the reliability of the applications, three of the more popular and widely used tracking programs were downloaded to three different smart phones to represent a good spectrum of operating platforms.

Calculating the speed of a yawing and braked vehicle often requires an estimate of the vehicle deceleration. During a steering induced yaw, the rotational velocity of the vehicle will typically be small enough that it will not make up a significant portion of the vehicle’s energy. However, when a yaw is impact induced and the resulting yaw velocity is high, the rotational component of the vehicle’s kinetic energy can be significant relative to the translational component. In such cases, the rotational velocity can have a meaningful effect on the deceleration, since there is additional energy that needs dissipated and since the vehicle tires can travel a substantially different distance than the vehicle center of gravity. In addition to the effects of rotational energy on the deceleration, high yaw velocities can also cause steering angles to develop at the front tires. This too can affect the deceleration since it will influence the slip angles at the front tires.

This paper presents a methodology for determining the position and speed of objects such as vehicles, pedestrians, or cyclists that are visible in video footage captured with only one camera. Objects are tracked in the video footage based on the change in pixels that represent the object moving. Commercially available programs such as PFTracktm and Adobe After Effectstm contain automated pixel tracking features that record the position of the pixel, over time, two dimensionally using the video’s resolution as a Cartesian coordinate system. The coordinate data of the pixel over time can then be transformed to three dimensional data by ray tracing the pixel coordinates onto three dimensional geometry of the same scene that is visible in the video footage background.

This paper presents a comprehensive literature review of original equipment event data recorders (EDR) installed in passenger vehicles, as well as a summary of results from the instrumented validation studies. The authors compiled 187 peer-reviewed studies, textbooks, legal opinions, governmental rulemaking policies, industry publications and presentations pertaining to event data recorders. Of the 187 total references, there were 64 that contained testing data. The authors conducted a validation analysis using data from 27 papers that presented both the EDR and corresponding independent instrumentation values for: Vehicle velocity change (ΔV) Pre-Crash vehicle speed The combined results from these studies highlight unique observations of EDR system testing and demonstrate the observed performance of original equipment event data recorders in passenger vehicles.

Improvements in computer image processing and identification capability have led to programs that can rapidly perform calculations and model the three-dimensional spatial characteristics of objects simply from photographs or video frames. This process, known as structure-from-motion or image based scanning, is a photogrammetric technique that analyzes features of photographs or video frames from multiple angles to create dense surface models or point clouds. Concurrently, unmanned aircraft systems have gained widespread popularity due to their reliability, low-cost, and relative ease of use. These aircraft systems allow for the capture of video or still photographic footage of subjects from unique perspectives. This paper explores the efficacy of using a point cloud created from unmanned aerial vehicle video footage with traditional single-image photogrammetry methods to recreate physical evidence at a crash scene.

Video and photo based photogrammetry software has many applications in the accident reconstruction community including documentation of vehicles and scene evidence. Photogrammetry software has developed in its ease of use, cost, and effectiveness in determining three dimensional data points from two dimensional photographs. Contemporary photogrammetry software packages offer an automated solution capable of generating dense point clouds with millions of 3D data points from multiple images. While alternative modern documentation methods exist, including LiDAR technologies such as 3D scanning, which provide the ability to collect millions of highly accurate points in just a few minutes, the appeal of automated photogrammetry software as a tool for collecting dimensional data is the minimal equipment, equipment costs and ease of use.

Previous work demonstrated that the orientation of tire mark striations can be used to infer the braking actions of the driver [1]. An equation that related tire mark striation angle to longitudinal tire slip, the mathematical definition of braking, was presented. This equation can be used to quantify the driver’s braking input based on the physical evidence. Braking input levels will affect the speed of a yawing vehicle and quantifying the amount of braking can increase the accuracy of a speed analysis. When using this technique in practice, it is helpful to understand the sensitivity and uncertainties of the equation. The sensitivity and uncertainty of the equation are explored and presented in this study. The results help to formulate guidelines for the practical application of the method and expected accuracy under specified conditions. A case study is included that demonstrates the analysis of tire mark striations deposited during a real-world accident.

Tire mark striations are discussed often in the literature pertaining to accident reconstruction. The discussions in the literature contain many consistencies, but also contain disagreements. In this article, the literature is first summarized, and then the differences in the mechanism in which striations are deposited and interpretation of this evidence are explored. In previous work, it was demonstrated that the specific characteristics of tire mark striations offer a glimpse into the steering and driving actions of the driver. An equation was developed that relates longitudinal tire slip (braking) to the angle of tire mark striations [1]. The longitudinal slip equation was derived from the classic equation for tire slip and also geometrically. In this study, the equation for longitudinal slip is re-derived from equations that model tire forces.