Search Results

In an air-cooled engine, the cooling air follows the cylinder surface at the front in an air stream. However, it separates from the cylinder at the rear reducing the cooling effect of the air stream on the rear of the cylinder. In order to improve the flow of air to the rear of the cylinder, baffle plates were mounted on the outside of the cylinder or between the fins symmetrically with respect to a plane through the axis of the cylinder. Experimental cylinders with baffle plates at various positions were investigated over a range of air velocities between 20 and 60 km/h in a wind tunnel. The temperature on the fin surfaces was measured to determine the temperature distribution provided to the circumference of the cylinder and the average fin surface heat transfer coefficient. To understand the effects of baffle plates on cylinder cooling, the air flow between the fins was observed with a high-speed video camera by the smoke wire method.

In air-cooled motorbike and stationary engines, waste heat dissipates from the cylinder through the cooling fins to the cooling air. In these engines, the cooling air flow follows the cylinder surface at the front of the cylinder, but separates at the rear, reducing cooling. To increase the distance over which the air flow follows the cylinder surface before it separates from the cylinder, and so to increase cooling at the rear, we experimented with cylinders utilizing contracted flow between fins. These cylinders have fins with different thickness at the front and the rear, so as to contract the air flow around the cylinder. We produced and tested three experimental cylinders with various lengths of contracted fins (tapered fins), in a wind tunnel at air velocities between 20 and 60km/h. We measured the temperature inside the cylinder over time to determine the heat release from the cylinder.

It is important for an air-cooled engine to utilize fins with effective engine cooling and uniform temperature in the cylinder circumference. In order to permit the development of design data, an experimental cylinder was developed having variable fin pitch and number of fin capability. This experimental cylinder was tested in a wind tunnel. Experimental cylinders with five different fin pitches and twelve different numbers of fins were investigated over a range of air velocity between 0 and 60 km/h. The temperature inside the cylinder and on the fin surface was measured to determine the heat release from the cylinder and the fin surface heat transfer coefficient respectively. To understand the operation of cooling fins for each fin pitch, number of fins, and air speed, the temperature in the space between the fins was measured and the air flow between them was observed with a high-speed video camera using the smoke wire method.

To improve engine torque and specific fuel consumption in a supermilage vehicle, we experimentally adjusted the valve lift and opening period in rocker arms, testing various follower configurations and adjust screws. Using the follower configuration in a commercially-available rocker arm, we compared 4 different levels of valve lift and opening period in the intake, and 4 different levels in the exhaust, making 16 combinations. Then, utilizing 5 kinds of modified follower configurations of the rocker arms in the intake, and 3 in the exhaust, we also compared 24 combinations (including the commercially-available follower configurations). We tested our experimental supermilage engine under full-load at 2000 to 4500rpm, simulating powering a supermilage vehicle.