Search Results

Researches and developments of electronic transmission control have been made along with the progresses of electronical technologies in order to meet the requirements of decreasing fuel consumption as well as improving drivability. And nowadays many kinds of electronically controlled transmissions have been applied to a variety of cars. In this paper, a history of electronic transmission control from the first control systems mounted on TOYOTA CORONA in 1970s for the first time in the world to the newest ones having a lock-up function for fluid coupling (Torque Converter) as well as progresses of the respective electronical transmissions to their practical uses will be explained.

This paper describes the Nippondenso in-line pump system designed for U.S. 1991 emissions regulation for medium duty diesel engines. With the combined use of the further improved in-line pump, NB-S and the multi-hole nozzle with a smaller orifice diameter, the required injection pressure of 100 MPa to 120 MPa at the nozzle can be achieved. However, some problems to be resolved exist in the subject fuel injection system: (1) secondary injection, (2) cavitation erosion of injection pipe, (3) higher pressure sealing of fuel, (4) undesirable fuel delivery curve vs. pump speed (called “Trumpet Shape” fuel delivery curve) Thus technical measures to cope with those problems are explained in details.

The purpose of this paper is to discuss injection rate control of the nozzle for direct injection engines. This paper will focus on fuel flow analysis of the nozzle, a key component of Fuel Injection Systems (FIS). The optimum designed nozzle improves fuel flow efficiency and controls injection rate. To meet emission regulations in 1990's, FIS are required to produce higher injection pressure and injection rate control which creates better fuel spray atomization and higher utilization of air. But the higher injection pressure makes injection rate control difficult. In particular, injection rate control by needle lift traveling control is difficult because fuel flow characteristics in the nozzle change with injection pressure and needle lift. Furthermore, the forced control of needle lift results in poor fuel spray atomization.

To meet the 1990s' requirements for diesel engines, the realization of innovative fuel injection system has been expected. Thus the fuel injection system named ECD-U2 was newly developed. ECD-U2 is the electronic unit injector system with high pressure common rail of which features are explained as follows; Fully electronic and flexible control in fuel quantity and injection timing. Adjustable injection rate shape Optimum injection pressure control Superior packageability and low drive torque loss. In this paper, design strategies, actual hardware configurations and some test results of ECD-U2 are described.

As a part of a project to develop high performance, compact and lightweight vehicle radiators, a highly corrosion resistive fin has been developed, especially for use in the salt-laden environment. It is a thin plate with a mutual diffusion layer of Cu-Zn formed on either surface. Owing to this composite structure, not only the corrosion resistance is double that of Cu-Sn alloy fins that are currently in use with a thickness over 20% smaller than the latter (38 μm vs 50 μm), but the corrosion of the bonding solder has been reduced to one half because the Cu-Zn diffused layer has brought about substantial reduction in the fin's surface potential.

This paper introduces a new type of radiator that has been developed with the objective being, high performance (compact size), light weight, and high quality in the field of copper/brass radiators that are superior in heat conduction, lower in price, yet there is still more room for improvement. The development of a new copper/brass radiator with the objective being higher performance (more compact), lighter weight, and higher quality has been completed. The synthetic study covered is not only an in-depth analysis of performance and structure, but the new development of materials and production engineering. As a result, the new radiator has a minimum of 10% increased performance, a minimum of 25% weight reduction, and its corrosion resistance is more than twice that of a conventional radiator.

The purpose of this paper is to discuss spray control of nozzle for heavy duty diesel engines. This paper will focus on fuel flow analysis of nozzle, key component of FIE (Fuel Injection Equipment). The optimum designed nozzle controls fuel flow and improves flow efficiency. FIE is required to produce higher injection pressure which creates better atomization and higher utilization of air. But the higher injection pressure results in increased pump driving torque, larger pump size and higher cost. To improve the fuel flow characteristic of nozzle, we analyzed it and developed a theoretical analysis method with computer model simulation to the optimum design nozzle. We also confirmed its effect by experiments.

We have developed a highly corrosion-resistant serpentine type condenser which is characterized by its manufacturing process that zinc is coated on the surface of a multi-cavity extruded tubing at the rate of 5-20 g/m2 by arc spray, and then, thus prepared tubing and corrugated fin stocks are brazed by the conventional Nocolok brazing process (Herein after this is referred to as ZAS NB process). By this brazing process as well as conventional flux brazing (FB) process, a highly pitting corrosion-resistant zinc diffusion layer is formed on the surface of the tubing at the time when brazing is operating. This newly developed method achieved improvements in productivity and quality of product.

This paper reports on research conducted at Nippondenso Co., Ltd. and Meiji University on nozzles for heavy duty diesel engines. It focuses on fuel flow analysis in the nozzle, a key component of Fuel Injection Systems (FIS). The optimum design nozzle improves fuel flow and spray characteristics. A newer and tougher emission regulation from the EPA for heavy duty diesel engines will be inevitable from 1998 onward. The goal of every company is to design new FIS in advance which meet the regulations of the future rather than paying for expensive developing costs after new laws have come into effect. To meet the regulation, requirements for FIS are higher injection pressure and injection rate control which create better fuel spray atomization and higher utilization of air. In particular, the nozzle must ensure that high injection pressure is effectively converted to fuel spray without pressure losses.

The smaller and lighter SV-06 sliding vane type compressor has been developed as the successor of the swash plate type 10P08 compressor for mini-car air conditioning applications. The SV-06 is the first vane type compressor in the world which utilizes an aluminum cylinder and rotor to achieve weight reduction. This was accomplished by introducing several new features to the design, such as a boron treated vane and smooth cylinder profile. Thinner vanes and a high performance oil separator were also introduced for compactness. This paper presents the many design features that allow small size and low weight while maintaining compressor performance and reliability, and focuses on the most important technology: (1) Abrasion Characteristics of Boron Treated Vane Against Al-Si Alloy (2) Oil Separator Performance

A highly corrosion resistant drawn cup type evaporator was developed. During the development of this evaporator, the corrosion characteristics of evaporators in the field were examined in detail. Profound understanding of the corrosion mechanism led to the development of a new, unique, corrosion test method which simulates the actual evaporator field service environment. The main factors involved in increasing the corrosion resistance of the brazing sheet are (1) reduction of iron and silicon content in the core alloy and, (2) addition of titanium to the core alloy. In the present alloy, titanium content varies lamellarly through the thickness of the core alloy. Regions of high titanium content have a more cathodic potential, thus causing corrosion to proceed along the low titanium content lamellae. Consequently, the reduced iron and silicon contents, and the titanium addition, have the net effect of reducing the pitting corrosion rate.

Extensive work was conducted to develop a corrosion resistant brazing sheet alloy and to apply it to a drawn cup type evaporator in automotive air conditioning system. The items to be investigated included the influence of chemical composition of the core alloy on corrosion resistance, suppression of erosion during the brazing cycle, and enhancement of the brazing sheet formability. Additional investigation was conducted to develop a new corrosion test method on the basis of better understanding of the mechanism of corrosion in the field and to evaluate the corrosion resistance of a evaporator fabricated from the new alloy. This paper, as Part 1, describes the results of alloy development from the metallurgical and electrochemical point of view.

The purpose of this study is to make clear the relationship between flow characteristics in the nozzle and injected spray characteristics. In this paper, we discuss the effect of the sac volume in the standard hole type nozzle on fuel flow and spray. The main object of this paper is to analyze fuel flow characteristics in the nozzle by using the enlarged model nozzles. Spray investigations confirmed that reducing the sac volume causes changes in the fuel injection direction at the initial stage of injection and in the spray penetration over consecutive injection. Flow investigations in the injection hole clarified that meandering the flow in the hole causes changes in the fuel injection direction. Flow investigations in the sac chamber clarified that separating the flow from the sac wall causes meandering the flow in the hole. Furthermore, the methods to restrain the flow in the sac chamber from separating from the sac wall were discussed.

In recent years, diesel engine exhaust gas regulations become more severe due to environmental concerns. Especially, particulate reduction is one of the biggest concern, and the reduction through high injection pressure has been studied.(1), (2) and (3) However, much is not yet known about the influence of changes in fuel flow inside the nozzle tip on atomization and engine performance, and there would exist a lot of room for exhaust gas reduction through the nozzle modification. In this research we found that changing the shape of the nozzle tip showed a remarkable difference in the smoke emission at low engine speed, analysis showed that difference in the flow rate at the nozzle orifice cause difference in the fuel spray droplet size and therefore the difference in the smoke emission.

In recent years, designers have attributed increasing importance to reducing noise in car interiors, and various improvements have led to a steady decrease each year in said interior noise. More recently, there has been abundant research on quantitative and qualitative approaches to interior noise, including studies on improving sound quality, such as elimination of rumbling noise and creating a feeling of linearity. Particularly engine noise, one of the major causes of interior noise, has been studied from various angles and significantly reduced in recent years. This has led in turn to increased interest in air induction noise which was a relatively minor noise source in the past. One method of reducing induction noise is the addition of several resonators to the induction system. Induction system components, including resonators, have a major effect on engine output and fuel consumption.

In the diesel field, innovative technology development has been desired for fuel injection system from the points of severe emission reduction to meet increasingly stringent emission regulation year by year respecting environmental protection and product improvement for various customer requirements including fuel consumption improvement. We have been pursuing the ideal fuel injection system which is called “ECD-U2” to meet above expectations. “ECD-U2” is the injection system of highly pressurized fuel with optimum injection timing by using of the injector controlled by high speed response magnetic valve. This system also has the fuel injection pattern controllability in one injection ( injection rate ) as one of the greatest asset. This report focuses on the new injector structure development to achieve desirable injection rate shaping for diesel engine combustion.

The electricity stored in the battery is the only source of energy driving an electric vehicle (EV). Therefore, the target of the air conditioning system for EVs is to cool and heat the air in the cabin and demist the wind shield using a small power consumption. We have developed a dehumidifying heat pump system that consists of an interior unit constructed to separate the recirculation air flow and fresh air flow, an exterior unit capable of controlling the absorption and radiation of heat, and an inverter-controlled, electric-driven compressor. The results of an experiment using this system proved that it could provide comfortable cabin air and good visibility through the wind shield with small power consumption at ambient temperatures ranging from -10°C to 40°C.

The conventional relay manufacturing line required several workers for manual assembly and adjustment operations. This problem was compounded by the fact that high precision quality of the product could not be easily achieved. To solve these problems, Nippondenso has made a breakthrough in developing new technologies which were incorporated in an automated relay manufacturing line, enabling an individual process cycle time of 0.9 seconds throughout all manufacturing processes. This includes component parts fabrication, assembly, inspection, adjustment and packaging, and does not require the direct intervention of any operators. Various models of relays can be run at the same time in this line because the set up time for different models is almost zero. This greatly improves production control.

This paper presents a new method of reliability testing for C-MOS VLSI's evaluation, i.e. a means to verify the future reliability prediction. In this method, VLSI's under testing are stressed by soft x-ray irradiation and subsequently annealed at moderate temperature and then they are classified according to the time required to recover the computer action of VLSI's to the previous level. This method offers a new technology for future reliability testing in higher accuracy of C-MOS VLSI's used in automotive electronics system compared to the conventional technique so called burn-in.

Considerations have been made on using turbine pumps as in-tank fuel pumps for electronic fuel injection systems (EFI). Flow channel dimension values, which had not been previously used for these types of pumps, were found to be very suitable for use as a fuel pump. The oil film visualization method was used to observe the flow pattern within the pump, and the results served to improve the flow channel shape. This contributed to designing a compact and efficient high-pressure fuel pump.