Search Results

To gain a better understanding of the exhaust emissions impact of olefins in a low aromatic, full boiling range gasoline, an evaluation of the before and after catalyst emissions of three highly olefinic refinery streams and three highly paraffinic refinery streams, blended 50/50 in motor alkylate, was conducted using a 3.1 L GM engine. The test fuels were also selected to consider the effects of volatility in addition to olefin concentration. The fuels were evaluated under three steady state engine operating conditions. The results of the tests indicate essentially only small differences in the before and after catalyst total hydrocarbons (THC) between the pairs of highly olefinic streams and the highly paraffinic streams at relatively the same volatility level, for two of the test conditions (2400RPM-light and moderate/heavy loads. The ozone forming potentials (OFP) for these fuels, across all three speed and load conditions, also show relatively small differences.

Speciated hydrocarbon emissions were measured at steady-state conditions in pre- and post-catalyst exhaust from a modern multi-valve fuel-injected and closed-loop controlled European gasoline engine tested on toluene, isooctane and diisobutylene. Unburned fuel contributed 70-80% of the total engine-out hydrocarbon emissions on toluene, but only 24% and <10% on isooctane and diisobutylene respectively except at idle where values were 71% and 47% respectively. Emissions from both of the aliphatic fuels were dominated by photochemically-reactive olefins such as isobutene and propene, plus ethyne, methane and formaldehyde. With the exception of ethyne, emissions of these compounds were much less from toluene. Even at rich conditions, most hydrocarbons were catalytically controlled to some extent, but the catalyst efficiency was dependant upon hydrocarbon composition.