Criteria

Text:
Affiliation:
Display:

Results

Viewing 1 to 30 of 454
2008-04-14
Technical Paper
2008-01-1285
John M. Cabaniss, Charles Gorman, Wayne Juchno
In 1990 in the USA, Section 206 of the Clean Air Act ushered in a new era in passenger car and light truck service and maintenance. Ensuing requirements led to introduction of sophisticated vehicle on-board diagnostic systems. These systems demand the increasing sophistication of service providers. The amount of service information has expanded exponentially. The sophistication of the tools needed to diagnose and repair vehicles has become increasingly complex. To meet the needs of today's service professionals, new systems had to be developed. The convergence of regulations, vehicle complexity, tool capabilities and the growing volume of service information required the vehicle producers and service communities to implement more efficient information delivery systems.
2001-06-08
Book
Daniel J. Holt
This comprehensive report closely examines automakers' multibillion-dollar development of fuel cell technology and its potential to revolutionize the automotive industry. With the likelihood that fuel cells will be used in mass-produced vehicles as early as 2003 - nearly a decade earlier than previous estimates - the fuel cell powered vehicle is expected to make up about 7% of the total market share by 2011. This report is the most current and complete source of information on this innovative technology.
2004-01-01
Book
Daniel J. Holt
A key topic of many technical discussions has been the development of alternative fuels to power the compression ignition engine. Reasons for this include the desire to reduce the dependency on petroleum-based fuel and, at the same time, to reduce the particulate matter (PM) and NOx emissions. Also, there has been interest generated in the diesel engine because of the reduction in greenhouse gases that has been proposed during the 2008-2012 time frame in Europe and the regulations that affect diesel engines in the United States.
2004-01-01
Book
Daniel J. Holt
A recent research report released by the U.S. Department of Transportation's National Highway Traffic Safety Administration (NHTSA) has stated that almost 175,000 pedestrians died on U.S roadways between 1975 and 2001. It was also noted in the report that 12% of all deaths related to motor vehicle crashes in the country are pedestrian fatalities. Most of the safety technology to date in vehicles has been applied to protect the occupants in the vehicle. What can vehicle manufacturers do to reduce pedestrian fatalities?
2005-03-30
Book
Daniel J. Holt
This comprehensive collection of 100 papers looks back at the technological advancements and accomplishments that played a key factor in the evolution of the internal combustion engine over the last 100 years. This collection covers the many challenges that affected the development of the internal engine powerplant through history, including producing vehicles that are faster, more responsive, fuel efficient, and create fewer emissions than previous models. The papers chosen to be a part of this collection hold a wealth of historical background. This background is only the beginning of many new developments to come, we need not rediscover what the pioneers in this industry have already learned but use this knowledge to further advance engine technology. Each chapter offers a look at the research, testing, and design changes that have taken place in specific components of the engine.
2005-04-11
Book
Daniel J. Holt
This collection chronicles the development of America's favorite sports car by the designers and engineers who made it happen. These 30 papers cover more than 50 years and six generations of the engineering, styling, and research and development of the Chevrolet Corvette. Twenty-two papers focus on the first five generations, with the last eight papers detailing the new sixth-generation Corvette. Material collected in this volume truly has unprecedented historical value. A 1954 paper by Maurice Olley presents a technical description of the first production Corvette. The book's preface includes insight from Zora Arkus-Duntov into the reasons behind the Corvette's development. Other highlights include comments from Corvette's chief engineer, a press release created by General Motors on its fiftieth anniversary, and a timeline with photos documenting the Corvette's evolution.
2000-09-29
Book
Daniel J. Holt
This report addresses the technical challenges engineers must face, including the issues of storage devices, generation of the 42 volts, and distribution of power. It contains information on all of the critical aspects related to the adoption of this technology.
2008-03-31
Article
In a move to protect the environment through self-regulation, SAE International, on behalf of industry, is pursuing a voluntary program under which automakers could tout compliance to an evaluation procedure outlined in an SAE standard (J2727) aimed at reducing refrigerant leakage from vehicle A/C systems.
2008-06-30
Article
For the average person, what constitutes a hot day is subjective. The same with a cold day. For aerospace engineers, though, it’s not subjective—and there’s a new SAE standard to prove it. The S-15, Gas Turbine Performance Simulation Nomenclature and Interfaces Committee, recently published ARP210, “Definition of Commonly Used Day Types (Atmospheric Ambient Temperature Characteristics Versus Pressure Altitude).”
2008-06-30
Article
Aerospace Engineering & Manufacturing has undergone a number of changes. Yes, its very name has been expanded to better reflect the new focus of the magazine. But these changes are based on significant customer feedback and research and have been implemented with only one objective in mind: to benefit the reader.
2008-03-31
Article
“Is an extremely affordable car a good thing?” As is the case with most topics, this answer depends on your viewpoint and frame of reference.
2008-06-30
Article
Two recently published SAE International standards (AS5725 and AS5653) address communications between aircraft and weapons systems. AS5725 concerns the interface for miniature mission stores, and AS5653defines a high-speed fiber channel network to improve the capability of MIL-STD-1760 to transfer digital data between aircraft/platforms, carriage systems, and mission stores.
2010-12-01
Article
The need for knowledge to help understand EVs, HEVs, PHEVs, and their expanding technologies has sparked the creation of SAE International's new Vehicle Electrification website.
2011-04-18
Article
The auto industry can play a major role in reducing carbon emissions and energy usage, but people’s habits will have to change. A key factor will be the shift to hybrids and electric vehicles, Coventry University Professor Peter White said during the SAE 2011 World Congress.
2008-03-31
Article
On April 30, I will retire from SAE International after 34 years of service. In this, my penultimate “Focus” article, I thought that an appropriate subject would be change.
2008-06-30
Article
Among Aerospace Recommended Practices (ARPs) recently adopted by SAE International is ARP 5757, Guidelines for Engine Component Tests. It was developed to provide a standard for substantiation of aircraft engine component airworthiness, according to ARP5757 sponsor Jim Schmohe of GE-Aviation.
2008-06-30
Article
The idea behind SAE International’s Aerospace Manufacturing and Automated Fastening conference and exhibition slated for September 16-18 in Charleston, SC, is to round up a bunch of manufacturing engineers in an appropriate venue, provide them with some organized learning and sharing opportunities, then turn them loose.
2008-06-30
Article
SAE International has formed a new committee, E-1, to address all facets of how the aerospace industry responds to environmental requirements contained “in rules, regulations, and law.”
2008-10-10
Article
“Designers and engineers can actually build more waste into a product in one afternoon than an army of manufacturing engineers can take out in an entire life cycle of that vehicle,” said John Waraniak, Vice President of Vehicle Technology at SEMA, driving home the point that OEMs need to collaborate with the aftermarket upfront to achieve what he calls “lean customization.”
2008-06-24
Article
As moderator for an SAE World Congress panel session, Michael Robinet, Vice President of Global Vehicle Forecasts for CSM Worldwide, presented some interesting data about the shifting landscape of the global customer. He noted that wealth for the average global citizen is expected to increase 75% by 2030, driven mainly by emerging markets such as Russia, China, and India.
2008-06-24
Article
As might be expected at the “Globalization and the Concept of Corporate Social Responsibility” session at the SAE World Congress, the panelists truly reflected the global nature of the topic. Executives from Germany, India, Russia, a German company in Brazil, and a Japanese company in the U.S. shared their expertise on globalization and where it’s headed.
2008-06-19
Article
Incremental improvements to the gasoline engine remain at the forefront of the race to meet the 35 mpg by 2020 regulation—a 40% increase—and recent price increases in diesel fuel may limit diesel engine inroads to light trucks, an SAE 2008 World Congress panel on fuel economy agreed.
2008-06-30
Article
SAE International has adopted ARP4418A, an aerospace recommended practice that provides guidance to measure contaminant levels in engine bleed air used in aircraft environmental control systems.
2008-03-31
Article
During the recent SAE Commercial Vehicle Congress & Exhibition, Jack Curcio—former President and CEO of Mack Truck—received the Inaugural Commercial Vehicle Sector Lifetime Achievement Award. In a conversation with Jack, who over the years has significantly contributed to both SAE and the industries we serve, he attributed his success in life to always doing the best job possible.
2008-06-30
Article
For a guy who said he did not have the obligatory joke to go with his speech, engineer extraordinaire David Urie managed to coax quite a few laughs out of his AeroTech audience.
2011-11-16
Article
So for the sake of expediency, I thought it might be useful to pull what I believe are significant and frank quotes and comments out of my Reporter’s Notebook and offer them here.
2011-11-16
Article
The laptop world has nothing on the automotive industry when it comes to meeting rigorous battery specs.
2011-11-15
Article
The cathode is the "energy-carrying heart" of the lithium-ion battery, according to Umicore's Tom Van Billinghen, and rethinking its materials and design is key to helping to reduce Li-ion battery costs.
2011-11-16
Article
Purpose-designed for EVs, the permanent-magnet-type motor will see its production launch in a few months.
2011-11-15
Article
SHANGHAI, CHINA—Tuesday afternoon, Nov. 15, 2011—“Me-chem-tronics” is the convergence of mechanical, chemical, and electrical/electronics engineering skills that are defining automotive product development jobs now and in the future, due to new vehicle designs, powertrains, and materials.
Viewing 1 to 30 of 454

Filter

  • Range:
    to:
  • Year: