Search Results

Emerging trend in the automotive industry all around the world is to develop vehicles to consume less fuel and to meet stringent emission norms by using engines of higher power to weight ratio and higher thermal efficiency. These advanced technology engines designed for high power output will use low viscous oil to reduce frictional losses and will operate at elevated temperature levels. Hence, the various auxiliaries and parts of these engines should be adaptable for the use of low viscous oil and should withstand higher temperatures. Oil pump is one such auxiliary which will be subjected to work with low viscous oil at higher temperatures levels. The oil pump taken for study and design improvement is an internal gear type positive displacement oil pump, used in a passenger car diesel engine. The un-meshing of the gears causes the inflow and meshing causes the outflow of lubricating oil. This process occurs continuously for providing a smooth pumping action.

In gasoline direct injection (GDI) engines, air-fuel mixture homogeneity plays a major role on engine performance, especially in combustion and emission characteristics. The performance of the engine largely depends on various engine operating parameters viz., start of injection, duration of injection and spark timing. In order to achieve faster results CFD is becoming a handy tool to optimize and understand the effect of these parameters. Therefore, this study aims on evaluating the two injection parameters viz., single and split injection to evaluate different flame characteristics. Novelty in this study is to define five different parameters which are called α, β, γ, δ and η the details of which are explained in the paper. In order to understand the flame characteristics, these five parameters are found to be very useful. In the present study, a single-cylinder, two-valve, four- stroke engine which is used in two-wheelers in India is considered for carrying out the CFD analysis.

Gasoline direct injection (GDI) technology is already in use in four wheeler applications owing to the additional benefits in terms of better combustion and fuel economy. The air-assisted in-cylinder injection is the emerging technology for gasoline engines which works with low pressure injection systems unlike gasoline direct injection (GDI) system. GDI systems use high pressure fuel injection, which provides better combustion and reduced fuel consumption. It envisages small droplet size and low penetration rate which will reduce wall wetting and hydrocarbon emissions. This study is concerned with a CFD analysis of an air-assisted injection system to evaluate mixture spray characteristics. For the analysis, the air injector fitted onto a constant volume chamber (CVC) maintained at uniform pressure is considered. The analysis is carried out for various CVC pressures, mixture injection durations and fuel quantities so as to understand the effect on mixture spray characteristics.

The main challenge in today's modern engines is to design the parts, which should withstand higher temperatures. To achieve this, selection of materials and process tolerances are very important factors. The product identified in this study is a conventional oil pump, which is an engine auxiliary component. The function of the oil pump is to supply oil to different parts of the engine to lubricate and reduce the overall engine friction. The different speed and load conditions for which the engine is subjected, pose a challenge to the oil pump, to supply the necessary quantity of oil at the required pressure and temperature. Normally, the oil pump is subjected to a temperature of 120°C at higher speeds. However, the peak oil temperature in modern diesel engines can be as high as 140°C to 150°C for a short period of time. For this study, two engine grade oils were selected. Numerical analysis was performed to predict the oil flow rate for these oil grades.