Search Results

This paper presents results of a study conducted to compare driving behavior and performance of drivers in two different fixed-base driving simulators (namely, FAAC and STI) while performing a same set of distracting tasks under geometrically similar freeway and traffic conditions. The FAAC simulator had a wider three-screen road view with steering feedback as compared to the STI simulator which had a single screen and narrower road view and had no steering feedback. Twenty four subjects (12 younger and 12 mature) drove each simulator and were asked to perform a set of nine different tasks involving different distracting elements such as, using a cell phone, operating the car radio, retrieving and selecting a map from map pocket in the driver's door, collecting coins to pay toll, etc.

Programmable vehicle models (PVMs) are intended to save time and costs in building bucks to evaluate vehicle interior packages. This paper presents results from a series of three studies conducted to determine the applicability and limitations of the methodology of using a PVM. The PVM used for the study was built by Prefix Corporation and has forty-two axes of adjustments. The first study verified the PVM's ability to reproduce dimensions. It showed that the PVM was acceptably accurate, with most dimension measurement ranges less than 2-3 mm. The second study was conducted to determine if subject responses are reliable indicators of package differences. Aside from some special causes, most were found to be. The third study was conducted to determine how well the PVM replicated 3 actual vehicles. Despite some dimensional discrepancies, there was evidence of correlation between subject responses from the PVM and actual vehicles.

This paper describes a research project currently in-progress to develop a parametric model of a vehicle for use in early design stages of a new vehicle program. The model requires key input parameters to define the kind of new vehicle to be designed — in terms of details such as its intended driver/user population, vehicle type (e.g. 2-box, 3-box designs), and some key exterior and interior dimensions related to its size and proportions. The model computes and graphically displays interior package, ergonomics zones for driver controls and displays, and field of views through window openings. It also allows importing or inputting and superimposing and manipulating exterior surfaces created by a designer to assess compatibility between the interior occupant package and the vehicle exterior.

This paper presents results of a study conducted to apply and evaluate the In-Vehicle Information System (IVIS) DEMAnD Model developed recently by the Virginia Polytechnic University's Center for Transportation Research for the Federal Highway Administration. This software-based model allows vehicle design engineers to predict the effects an in-vehicle information system might have on driver performance. The model was exercised under nine different driver attention task levels ranging from simple, such as glancing into a side view mirror, to complex, such as operating an in-vehicle navigation system. The nine driver tasks were evaluated using three different vehicle configurations and two levels of driver-roadway complexity. In addition, real-world information on driver visual performance was also collected during four different tasks for comparison with model predictions of these same functions.

Seat comfort is a highly subjective attribute and depends on a wide range of factors, but the successful prediction of seat comfort from a group of relevant variables can hold the promise of eliminating the need for time-consuming subjective evaluations during the early stages of seat cushion selection and development. This research presents the subjective seat comfort data of a group of 30 participants using a controlled range of seat foam samples, and attempts to correlate this attribute with a) the anthropometric and demographic characteristics of the participants, b) the objective pressure distribution at the body-seat interface and c) properties of the various foam samples that were used for the test.

A fixed base driving simulator called the VVDS (Virtual Vehicle Driving Simulator), its operating procedure and software system have been developed by a team of automotive suppliers (called ACE -- Advanced Cockpit Enabler) for quick evaluations of early working prototypes of driver interfaces. The system is designed to provide quick feedback to the product designers in early concept generation and validation phases of new automotive HMI architecture strategies and interfaces of various in-vehicle devices. The simulator consists of a reconfigurable cab with quick-change attachments to mount various controls and displays in package positions. A number of drivers are asked to drive the simulator and perform a number of tasks when prompted by pre-recorded voice commands. The entire data collection and data analysis procedure is developed such that new experiments can be configured, implemented and analyzed quickly and with the least amount of a human analyst’s involvement.

This paper present a unique and comprehensive design process that has been pilot tested to assure that future automotive cockpit systems are well integrated, cost effective and they achieve superior ergonomics performance. With ever increasing possibilities of new technological feature content and tremendous cost pressures, the auto manufacturers have a challenging task to provide the customers with the latest features at affordable costs in shorter design cycles. The Automotive Cockpit Enablers (ACE) team consisting of seven automotive suppliers and two universities has created a unique process to approach the problem. The process consists of a series of steps and inter-workings of three cross-functional teams.

A fixed-base driving simulator with a 14-degree of freedom vehicle dynamics model was used to compare the lane tracking performance of test subjects using a joystick steering controller to that using a conventional steering wheel. Three driving situations were studied: a) straight-line highway driving, b) winding road driving (country road), and c) evasive maneuvering - a double lane change event. In addition, three different joystick force-feedback settings were evaluated: i) linear force feedback, ii) non-linear, speed sensitive force feedback and iii) no force feedback. A conventional steering wheel with typical passenger car force feedback tuning was used for all of the driving events for comparison.

With recent advances in microprocessors and data storage technologies, vehicle users can now bring or access large amounts of data in vehicles for purposes such as communication (e.g. e-mail, phone books), entertainment (e.g. music and video files), browsing and searching for information (e.g. on-board computers and internet). The challenge for the vehicle designer is how to design data displays and retrieval methods to allow data search and manipulation tasks by managing driver workload at safe acceptable levels. This paper presents a data retrieval menu system developed to assess levels of screens (depth of menu) that may be needed to select required information when a vehicle is equipped with the capability to access audio files, cell phone, PDA, e-mail and “On-star” type functions.

The automotive interior suppliers are challenged to develop materials, that not only perform functionally, but also provide the right combination sensory experience (e.g. visual appeal, tactile feeling) and brand differentiation at very competitive costs. Therefore, the objective of this research presented in this paper is to develop a methodology that can be used to measure customer perception of interior materials and to come up with a unique system for assessing value of different interior materials. The overall methodology involves the application of a number of psychophysical measurement methods (e.g. Semantic Differential Scaling) and statistical methods to assess: 1) overall customer perceived quality of materials, 2) elements (or attributes) of perception, and 3) value of materials from OEM's viewpoint in terms of the measurement of perception of quality divided by a measure of cost.

This paper presents results of a research project conducted to develop a methodology and to refine the specifications of a small, low mass, low cost vehicle being developed at the University of Michigan-Dearborn. The challenge was to assure that the design would meet the needs and expectations of customers in three different countries, namely, China, India and the United States. U.S, Chinese and Indian students studying on the university campus represented customers from their respective countries for our surveys and provided us with the necessary data on: 1) Importance of various vehicle level attributes to the entry level small car customer, 2) Preferences to various features, and 3) Direction magnitude estimation on parameters to size the vehicle for each of the three markets.

This paper presents a process and its results used to define and design interior items such as controls, displays, handles, etc. for a low mass vehicle (LMV) being developed at the University of Michigan-Dearborn. The exterior and interior design of the vehicle was done by students at the College of Creative Studies, Detroit. The size of the low mass vehicle is comparable to the current C-class production vehicles (such as Ford Focus), but it will weigh about 30% less than the Toyota Echo. The vehicle is targeted as a low cost, entry level, small car for markets in China, India and the United States. To assure that the feature content would be suitable for the three potential markets, students from China, India and the United States available on the UM-Dearborn campus were interviewed. The results from the survey were used to refine the exterior and interior features and content of the vehicle.

This paper describes a computerized value analysis tool (VAT) developed to aid automotive interior designers, engineers and planners to achieve the high levels of perceived quality of materials used in automotive door trim panels. The model requires a number of inputs related to types of materials, their manufacturing processes and customer perceived quality ratings, costs and importance of materials, features located in different areas of the door trim panel, etc. It allows the user to conduct iterative evaluation of total cost, total weighted customer perceived quality ratings, and estimates of perceived value (perceived quality divided by cost) for different door trim areas as well as the entire door trim panel. The VAT, thus, allows value and cost management related to materials and processing choices for automotive interiors.

This paper presents results of a three-phase research project aimed at understanding how future automotive interior materials should be selected or designed to satisfy the needs of the customers. The first project phase involved development of 22 five-point semantic differential scales to measure visual, visual-tactile, and evaluative characteristics of the materials. Some examples of the adjective pairs used to create the semantic differential scales to measure the perceptual characteristics of the material are: a) Visual: Light vs. Dark, Flat vs. Shiny, etc., b) Visual-Tactile: Smooth vs. Rough, Slippery vs. Sticky, Compressive vs. Non-Compressive, Textured vs. Non-Textured, etc., c) Evaluative (overall perception): Dislike vs. Like, Fake vs. Genuine, Cheap vs. Expensive, etc. In the second phase, 12 younger and 12 older drivers were asked to evaluate a number of different automotive interior materials by using the 22 semantic differential scales.