Search Results

Strong dependency on crude oil in most areas of modern transportation needs lead into a significant consumption of petroleum resources over many decades. In order to maximize the effective use of remaining resources, various types of powertrain topologies, such as hybrid configurations among fuel cell, electric battery as well as conventional IC engine, have been proposed and tested out for number of vehicle classes including a personal commuting vehicle. In this paper the vehicle parameters are based on a typical commercial sub-compact vehicle (FIAT Panda) and energy needs are estimated on the sized powertrain. The main control approach is divided in two categories: off-line global optimization with dynamic programming (DP, not implementable in real time), and on-line Proportional and Feed-Forward with PI controllers. The proposed control approaches are developed both for charge-sustaining and charge-depleting mode and sample results are shown and compared.

The simulation and evaluation of land vehicle performance requires accurate representations of driving conditions. Currently, many driving cycles have been developed and used in the determination of vehicle fuel economy and emission performance. These driving cycles are typically defined as vehicle speed and power trajectories over time. However, most of the standard driving cycles are short in duration and distance and inadequate in representing a wide range of actual driving conditions. There are also many specialized driving cycles designed for specific types of vehicles, but these are often not applicable to more than a specific class of vehicles. Moreover, more detailed driving schedules are often kept as proprietary information within the vehicle manufacturers.

This paper presents a general formulation of the instantaneous power split between a fuel cell and an electrical accumulator in a charge-sustaining fuel cell hybrid vehicle. The approach proposed in this paper is based on the ECMS (Equivalent Consumption Minimization Strategy) control strategy previously developed for parallel hybrid vehicle applications suitable for real time application and allowing the overall minimization of hydrogen consumption while meeting the driver demand. This control strategy has been applied to a representative hybrid PEM (Proton Exchange Membrane) fuel cell mid-size vehicle. Using a Hybrid Fuel Cell vehicle simulator, the vehicle performance and energy requirements are estimated. The results provided by the ECMS control strategy approach are also compared to a more basic approach.

The aim of this paper is to describe a unified approach to modeling the energy efficiency and power flow characteristics of energy storage and energy conversion elements used in hybrid vehicles. Hybrid vehicle analysis and design is concerned with the storage of energy in three domains - chemical, mechanical, and electrical - and on energy conversions between these domains. The paper presents the physical and mathematical basis of this modeling approach, as well as a modular simulator that embodies the same basic principles. The use of the simulator as an analysis tool is demonstrated through the conceptual design of a sport-utility hybrid drivetrain.

Electric transportation has the potential of mitigating CO2 emissions and reduce fuel needs. One of the challenges for the growth of this industry is limited range and efficiency of the vehicles associated with battery storage systems and electric drive technology. High voltage systems are expected to increase efficiency and then vehicle mileage, however this increases the severity of the fault conditions, especially in case of short circuit. Melting fuse is commonly used for the purpose of protection in electrified vehicles, while it is effective and reliable, there are several shortcomings such as lack of precision, effect of ambient temperature, bulky, interruption time depending on the fault condition etc. Additionally, the on-board DC power distribution system (PDS) is characterized by low impedance, in this environment fuses are not able to limit the fault current leading to damage of electronics and hazard for the battery pack.