Search Results

Temporary-use-only spare tires are common standard equipment on motor vehicles while run-flat tires are offered as standard equipment on some motor vehicles. This paper describes testing on a 1995 GMC Safari all-wheel-drive minivan with a rear Uniroyal Hideaway / Temporary-Use-Only tire and a 1997 Mercury Grand Marquis with a self-supporting run-flat tire manufactured by Bridgestone. The testing included circle turn tests and 180° step steer tests at target speeds of either 30 or 35 miles per hour (low speed J-turn test). Control tests were conducted with standard normally inflated tires. Both the standard tires and run-flat tires were also tested in a modified condition involving the removal of the tread and outer steel belt, simulating a tire which has experienced a complete tread-belt separation.

Catastrophic and sudden tire tread separation is an event that drivers of motor vehicles may encounter and, in some instances, is implicated as the cause of motor vehicle crashes and related injury or property damage. In an effort to understand how tire tread separation affects vehicle handling, a series of tread separation handling test programs were conducted. In each tread separation test program a sport utility vehicle was instrumented and equipped with steel belted radial tires that were modified to emulate tread separation between the inner and outer steel belts. The test vehicle was then subjected to a variety of open and closed loop handling test maneuvers. This paper presents the data and analysis from these tests. The research demonstrates through controlled experiments that a tire tread separation has an effect on the vehicle’s fundamental handling characteristics. It also demonstrates that the effect depends on the position of the compromised tire on the vehicle.

Tests were conducted to evaluate the effects of the tire-induced vibration caused by a tread separating rear tire on the handling characteristics of a 1996 four-door two-wheel drive Ford Explorer. The first test series consisted of a laboratory test utilizing a 36-inch diameter single roller dynamometer driven by the rear wheels of the Explorer. The right rear tire was modified to generate the vibration disturbance that results from a separating tire. This was accomplished by vulcanizing sections of retread to the prepared surface of the tire. Either one or two tread sections covering 1/8, 1/4, or 1/2 of the circumference of the tire were evaluated. The results demonstrated that a tire modified with two bonded-on tread sections driven at half speed replicated axle tramp characteristics of a modified tire with a single bonded-on tread section at the peak axle tramp speed.