Search Results

A single-cylinder engine was used to study the potential of a high-efficiency combustion concept called gasoline direct-injection compression-ignition (GDCI). Low temperature combustion was achieved using multiple injections, intake boost, and moderate EGR to reduce engine-out NOx and PM emissions engine for stringent emissions standards. This combustion strategy benefits from the relatively long ignition delay and high volatility of regular unleaded gasoline fuel. Tests were conducted at 6 bar IMEP - 1500 rpm using various injection strategies with low-to-moderate injection pressure. Results showed that triple injection GDCI achieved about 8 percent greater indicated thermal efficiency and about 14 percent lower specific CO2 emissions relative to diesel baseline tests on the same engine. Heat release rates and combustion noise could be controlled with a multiple-late injection strategy for controlled fuel-air stratification. Estimated heat losses were significantly reduced.

NOx aftertreatment is an essential subsystem to enable diesel and lean gasoline engines to meet emissions regulations. A selective catalytic reduction (SCR) system, which uses urea to create ammonia (NH3) for NOx reduction, is one popular form of NOx aftertreatment system. These urea based NOx aftertreatment systems can benefit from closed-loop control when appropriate NH3, NOx, or NO2 exhaust gas sensors are available. For example, knowing exhaust NO2 emissions after a diesel oxidation catalyst can help the urea dosing strategy to maximize the efficiency of a urea SCR system. Such sensing capability, combined with ammonia sensing, can provide enhanced closed-loop control of the SCR system as well as information for on-board diagnosis. This paper covers Delphi's progress in developing an exhaust NO2 sensor.