Search Results

The aim of this study was to synthesize environmentally adapted Trimethylolpropane (TMP) esters from cottonseed and soybean oils and to examine their quality parameters and tribological properties as potential lubricant basestocks. A two stage production process was followed. At first the above mentioned vegetable oils were transformed to the corresponding methyl esters via methanolysis in the presence of sodium methoxide. The desired TMP esters were finally synthesized by alkaline transesterification of the previously produced methylesters with TMP using sodium methoxide as catalyst. Following the purification phase the physicochemical characteristics of the synthesized TMP esters were examined. The tribological properties were evaluated by employing a Four-Ball apparatus. An additive-free mineral oil base oil was used as a reference lubricating fluid.

In this study, the transesterification process of 4 different vegetable oils (sunflower, rapeseed, olive oil and used frying oil) took place utilizing ethanol, in order to characterize the ethyl esters and their blends with diesel fuel obtained as fuels for internal combustion engines. All ethyl esters were synthesized using calcium ethoxide as a heterogeneous solid base catalyst. The ester preparation involved a two-step transesterification reaction, followed by purification. The effects of the mass ratio of catalyst to oil, the molar ratio of ethanol to oil, and the reaction temperature were studied on conversion of sunflower oil to optimize the reaction conditions in both stages. The rest of the vegetable oils were converted to ethyl esters under optimum reaction parameters. The optimal conditions for first stage transesterification were an ethanol/oil molar ratio of 12:1, catalyst amount (3.5%), and 80 °C temperature, whereas the maximum yield of ethyl esters reached 80.5%.

Air pollution caused by diesel emissions, especially NOx, particulate matter, carbon monoxide and unburned hydrocarbons, has been a noteworthy matter. In Europe and the United States, legislative efforts towards improving air quality not only lead manufacturers to develop and introduce further improved emission control systems, but also the trigger demanding requirements on the oil industry towards producing advanced fuels. Therefore, much work on the effects of fuel properties on the emissions and engine performance has been performed worldwide. The fuels produced by the refineries usually comply with the existing specifications. However, alterations in the fuel properties may occur through the supply chain to the service stations due to failures of the distribution system or adulteration with lower value and taxation fuels (heating oil, marine diesel or industrial solvents).

The ability of a catalyst to enhance the performance of synthesized biobased lubricant basestock was investigated in this study. Pomace olive oil, cottonseed oil, used frying oil and methyl oleate were utilized as starting materials for the production of the biobased lubricants and a two stages transesterification methodology was followed. Initially the oils were converted to their corresponding fatty acid methyl esters via methanolysis. The resulting methylesters were subsequently transesterified with TMP producing the desired oleochemical ester. These syntheses were carried out in the presence of either sodium methoxide or Ca/TEA alkoxide as catalysts. Following the purification phase, the synthesized esters were evaluated as potential biolubricants regarding their physicochemical properties such as viscosity index, pour point and acid value.