Search Results

Spray model of KIVA-II code was modified by comparing with experimentally measured spray liquid phase penetration and spray image in a transparent engine. The KIVA-II code with modified spray model was applied to a HSDI engine with different combustion chamber shapes, nozzle specifications and injection pressures. The results were compared with experimental emissions and it was found that the modified KIVA-II code was relatively able to predict the effects of engine design factors such as combustion chamber shape and injector on NOx and soot emissions.

This paper introduced a very simple method to measure the liquid phase of spray in an optically accessible DI diesel engine. Particular attention was paid to easy usage and maintaining the compression ratio of the real engine. As a result, a less-expensive 4 W argon laser was used as the beam source and an E-10 high-speed camera was used for continuously observing the elastic-scatter liquid phase image. Meanwhile, the compression ratio can be kept as the real engines by this method. Through this method, the effects such as injection pressure, nozzle specification, intake air boost and temperature on liquid phase penetration before ignition were investigated. Reducing nozzle hole diameter decreased the length of the liquid phase. Increasing injection pressure hastened the evolution of liquid phase, while the liquid phase length varied complexly. Increasing intake air boost considerably shortened the liquid phase penetration and ignition delay.

The cause of unburnt hydrocarbon emission (HC) in small DI Diesel engines at light load was studied both by engine emission tests and combustion process visualizing with a common rail injection system. An optically accessible engine, which was enabled to visualize both combustion chamber and squish area, was used to investigate the behavior of spray, mixture distribution and so on. Factors supposed to be the major cause of forming HC in small DI Diesel engines, such as the direct impingement of liquid-phase fuel spray on the combustion chamber wall, the uneven formation of fuel sprays from hole to hole and the spread of the fuel droplets, mixture and flame to the squish area were investigated. Meanwhile, measures for further reducing HC were discussed.