Search Results

Friction plate degradation and/or friction plate glazing has often been related to the loss of friction control in automatic transmissions. However, in JASO SAE No.2 and LVFA tests, friction material glazing has been found to not be a sufficient condition for the loss of anti-shudder performance or a reduction in torque capacity durability. Therefore, changes in automatic transmission fluid properties rather than changes to the friction surfaces would be expected to play a dominant role in controlling anti-shudder performance and torque capacity. Earlier theoretical studies have proposed that friction in wet clutches is a combination of boundary and hydrodynamic friction. Therefore, changes in these properties should control anti-shudder durability and torque capacity. In this paper, we confirm that boundary and thin-film friction contribute to friction measured in JASO SAE No.2 and LVFA tests.

To develop an automatic transmission fluid (ATF) that meets DEXRON® III-H specifications, the ATF must pass two critical tests, the GM oxidation test (GMOT) and the GM cycling test (GMCT), in addition to many other performance tests. The specification on the GMOT is that delta TAN (difference in total acid number compared with the fresh oil) at the end of the test does not exceed 3.25 while the specifications on GMCT are that delta TAN cannot exceed 2.0 and the 1-2 shift time must stay between 0.30 and 0.75 seconds throughout the test. For this work, we analyze oil oxidation and changes in oils' surface tension, drum and band surface degradation and deposit formation. We have found that with respect to the delta TAN limits of the DEXRON® III-H specification, the GMCT is more severe than the GMOT. The effect of base oil chemistry on oxidation in these tests has been quantified. Oil oxidation is not responsible for the GMCT 1-2 shift time increase.