Search Results

For diesel emission control systems containing a Diesel Oxidation Catalyst (DOC) and a Catalyzed Soot Filter (CSF) the DOC is used to oxidize the additional fuel injected into the cylinder and/or the exhaust pipe for the purpose of increasing the CSF inlet temperature during the soot regeneration. Hydrocarbon (HC) oxidation performance of the DOC is affected by HC species as well as a catalyst design, i.e., precious metal species, support materials and additives. How engine-out HC species vary as a function of fuel supply conditions is not well understood. In addition, the relationship between catalyst design and oxidation activity of different hydrocarbon species requires further study. In this study, diesel fuel was supplied by in-cylinder, post injection and exhaust HC species were measured by a gas chromatograph-mass spectrometry (GC-MS) and a gas analyzer. The post injection timing was set to either 73°, 88° or 98° ATDC(after top dead center).

Pre-filter diesel oxidation catalyst (DOC) development for a DOC-CSF system has been conducted. The pre-filter DOC is required to efficiently oxidize fuel and generate heat to regenerate accumulated soot within the catalyzed soot filter (CSF). Therefore, high thermal durability is required. In addition, good transient hydrocarbon (HC) activity is required for the DOC to reduce tailpipe HC emissions. The required performance is dependent on the OEM's system control strategy. A DOC catalyst designed to have well dispersed Pt showed high fuel combustion performance. Such high Pt dispersion was obtained by using high specific surface area Al2O3. Zeolite included into the catalyst formulation showed higher transient HC performance compared to a catalyst without zeolite. The effective catalyst layer depth with respect to transient HC activity was studied by computer simulation.

Three-way catalyst (TWC) converters are used to remove harmful substances (e.g., carbon monoxide (CO), nitrogen oxides (NOx), and hydrocarbons (HC)) emitted from gasoline engines. However, a large amount of emissions could be emitted before the TWC reaches its light-off temperature during a cold start. For hybrid electric vehicles (HEVs) powered by gasoline engines, the emission purification performance by TWC converters unfortunately deteriorates because of mode switching from engine to battery and vice versa, which can repeatedly generate cold start conditions for the TWCs. In this study, aiming to reduce emissions from series HEVs by early activation of TWCs, numerical simulations and experiments are carried out. An HEV is tested on a chassis dynamometer in the Worldwide Light-duty Test Cycle (WLTC) mode. The upstream and downstream gas conditions of the close-coupled catalyst converter are measured.