Search Results

As part of a California Selective Catalyst Reduction (SCR) system demonstration and evaluation project [13], the authors and their industrial partners have conducted engine dynamometer emissions tests of SCR systems. The transient Federal Test Procedure (FTP) cycle and 13 Mode European Stationary Cycle (ESC) were conducted using certification diesel fuel with 300-500 ppm of sulfur. This paper reviews the performance of the first system to meet the goal of attaining 1 g/bhp-hr NOx emissions in the transient FTP cycle on a 1999 DDC Series 60 engine that has an initial 4 g/bhp-hr level. This paper discusses key characteristics of a typical automotive SCR system and then presents the results and analysis of the engine dynamometer emission testing of a SCR system. The paper concludes with a discussion of the challenges involved in on-road operation of the system.

Line-haul truck engines are frequently idled to power hotel loads (i.e. heating, air conditioning, and lighting) during rest periods. Comfortable cabin climate conditions are required in order for mandatory driver rests periods to effectively enhance safety; however, the main diesel engine is an inefficient source of power for this conditioning. During idle, the diesel engine operates at less than 10% efficiency, consuming excess diesel fuel, generating emissions, and accelerating engine wear. One promising alternative is the use of small auxiliary power units (APUs), particularly fuel cell-based APUs. The Institute of Transportation Studies (ITS-Davis) developed an ADVanced VehIcle SimulatOR (ADVISOR)-based model to quantify the costs and benefits of truck fuel cell APUs. Differences in accessories, power electronics, and control strategy between the conventional engine idling and APUequipped systems are analyzed and incorporated into the model.

In the immediate future the introduction of a wider variety of fuel types will play a significant role in reducing emissions and in solving the energy needs of the transportation industry. Both compressed natural gas, CNG, and hydrogen are expected to play significant roles, and the present paper shows that these fuels, when used together, can offer large benefits in NOx emissions. Significant reductions in NOx emissions will be required for CNG transit buses and heavy duty trucks, if they are to meet the future stringent emissions standards that come into effect in the year 2007. In the present paper we have applied a newly developed engine model with detailed chemical reactions to predict the “in cylinder” production to NOx under realistic engine conditions.

This paper presents model-based predictions of the performance of diesel, compressed natural gas (CNG), and hybrid buses on bus routes in the City of San Francisco. The bus route details were obtained by recording time-series measurements of speed and grade during actual runs of buses on the city streets under different traffic conditions. The transit buses' physical and mechanical characteristics were obtained from manufacturers' data and chassis dynamometer testing of the buses on different city cycles. Both the bus routes and the bus performance characteristics were put into the simulation package ADVISOR from the National Renewal Energy Laboratory (NREL). The most extreme results were for the San Francisco routes that have high grades. The high grades cause performance and emissions problems for both the diesel and CNG buses relative to the hybrid bus.