Search Results

Laser transmission welding is a relatively new technique for joining thermoplastic components in the automotive industry. Laser energy is passed through a laser-transparent part and dissipated as heat in a laser-absorbent component. There is currently no standardized test to assess the strength of laser transmission welds made using thermoplastic materials. A properly-designed test allows the weld strength of the joint to be measured accurately and rapidly. This paper reports on a technique for measuring overlap shear strength. This study compares two weld orientations (weld line parallel and perpendicular to assembly loading) using polycarbonate, polypropylene, polyamide 6, polyamide 6 reinforced with 30% glass fibres and polyamide mXD6 reinforced with 50% glass fibres. Assemblies were made using a range of laser powers. In order to simulate industrial conditions, artificial gaps were also introduced between the transparent and absorbent parts.

In Laser Transmission Welding (LTW), a laser beam passes through a transparent part and is dissipated as heat in an absorbent material through the use of laser-absorbing pigments such as carbon black (CB). This energy is then conducted further into both parts. Melting and subsequent solidification occur at the interface causing a weld to form between the two parts. Gluing or welding structures to the back of automotive Class-A panels often results in the appearance of undesirable surface deformations on the Class-A side. Through control of the laser welding and material parameters, it may be possible to use contour LTW as a means of joining structures to the back of absorbent Class-A panels without creating these unwanted surface defects. A series of lap welds was made using a range of CB levels and laser powers. A profilometer was used to measure the size and shape of the defects generated on the surface of the black part. Two types of defects were observed: ribs and sink marks.