Search Results

As a new vehicle is based on common vehicle platform, the durability problems of chassis components in development stage are decreasing. However a vehicle body structure is changed by exterior design and a chassis and a suspension are tuned by vehicle performance targets. The main issue on developing a new vehicle is to satisfy the durability target of a body structure and tuned suspension components. The accuracy of durability Computer Aided Engineering analysis is mainly depending on the accuracy of input loads and boundary conditions on suspension system. The input loads should be estimated accurately. These could be changed by vehicle specifications such as vehicle weight, wheel base and so on. It is also affected by the change of suspension types and tuning parameters. This paper presents the experimental parametric study results using road load data analysis techniques.

A study for improving the resistance to fretting corrosion of SCr 420 pinion gear was conducted. Fretting is the damage to contacting surfaces experiencing slight relative reciprocating sliding motion of low amplitude. Fretting corrosion is the fretting damage to unlubricated contacting surfaces accompanied by corrosion, mostly oxidation that occurs if the fretting occurs in air. Two kinds of conventional heat treatment and a newly designed one suggested for improving the resistance to the fretting corrosion of pinion gear were compared each other to find out what is the main factor for generating fretting corrosion phenomenon. Increased carbon potential at both the heating and diffusing zone and reduced time of tempering was found out to be a solution for improving the resistance to fretting corrosion of forged and heat treated gear steel. On the contrary, modified carbo-nitriding using ammonia gas has been getting worse the fretting corrosion problem.