Search Results

Some automakers have been studying variable compression ratio (VCR) technology as one possible way of improving fuel economy. In previous studies, we have developed a VCR mechanism of a unique multiple-link configuration that achieves a piston stroke characterized by semi-sinusoidal oscillation and lower piston acceleration at top dead center than on conventional mechanisms. By controlling compression ratio with this multiple-link VCR mechanism so that it optimally matches any operating condition, the mechanism has demonstrated that both lower fuel consumption and higher output power are simultaneously possible. However, it has also been observed that fuel consumption does not reduce further once the compression ratio reached a certain level. This study focused on the fact that the piston-stroke characteristic obtained with the multiple-link mechanism is suitable to a longer stroke.

A fundamental examination was made of gasoline-fueled homogeneous charge compression ignition (HCCI) combustion under various compression ratios, intake temperatures and intake gas compositions. The results revealed the basic combustion characteristics, and the ignition timing and combustion duration were found for every set of conditions. Suitable intake air temperatures were also determined for every operating condition. Internal residual gas was used to raise the mixture temperature in the cylinder. The region of maximum engine speed was expanded without heating the intake air. Minimum and maximum indicated mean effective pressures (IMEP) were found in several engine speed regions under several residual gas rates. Based on the results, a comprehensive interpretation is given of conventional HCCI combustion in 2- and 4-stroke gasoline engines.

This paper presents a study of antiknock performance under various octane numbers and compression ratios in a direct injection spark ignition (DISI) gasoline engine. The relationship between the octane number and engine performance in the DISI engine-the engine torque and the break specific fuel consumption (BSFC)-was investigated in comparison with a multipoint injection (MPI) engine. Due to the improvement in the charging efficiency and the advance of the ignition timing by cooled aspiration, the engine torque of the DISI engine was improved over that of the MPI engine. It was also found that the octane number requirement (ONR) was reduced. In addition, the possibility of engine performance enhancement at high compression ratios was studied. At high compression ratios, the engine torque is reduced due to the heavy knocking when low octane gasoline is used. However, an improvement in the engine torque has been observed with high octane gasoline.

Vehicle manufacturers developed two mixture formation concepts for the first generation of gasoline direct-injection (GDI) engines. Both the wall-guided concept with reverse tumble air motion or swirl air motion and the air-guided concept with tumble air motion have the fuel injector located at the side of the combustion chamber between the two intake ports. This paper proposes a new GDI concept. It has the fuel injector located at almost the center of the combustion chamber and with the spark plug positioned nearby. An oval bowl is provided in the piston crown. The fuel spray is injected at high fuel pressures of up to 100 MPa. The spray creates strong air motion in the combustion chamber and reaches the piston bowl. The wall of the piston bowl changes the direction of the spray and air motion, producing an upward flow. The spray and air flow rise and reach the spark plug.