Search Results

Partially Premixed Combustion (PPC) is a combustion concept which aims to provide combustion with low smoke and NOx with high thermal efficiency. Extending the ignition delay to enhance the premixing, avoiding spray-driven combustion and controlling the combustion temperature at an optimum level through use of suitable lambda and EGR levels have been recognized as key factors to achieve such a combustion. Fuels with high ignitability resistance have been proven to be a useful to extend the ignition delay. In this work pure ethanol has been used as a PPC fuel. The objective of this research was initially to investigate the required operating conditions for PPC with ethanol. Additionally, a sensitivity analysis was performed to understand how the required parameters for ethanol PPC such as lambda, EGR rate, injection pressure and inlet temperature influence the combustion in terms of controllability, stability, emissions (i.e.

A single-cylinder, 500cc research engine was tested under Spark-Ignition (SI) and Controlled Auto-Ignition (CAI) operation with similar load and speed conditions. Camshafts with low-lift and short duration, run with a negative valve overlap, were used to obtain CAI at wide open throttle. Two different camshaft profiles were tested in order to get a wide span of loads at 1200 and 2000rpm. The SI engine was Port Fuel-Injected (PFI) while the CAI engine was tested with both PFI and an Orbital Air-Assist Direct-Injection (DI) system. To reduce the high Indicated Specific Nitrogen Oxide (ISNOx) emissions at λ=1, 10% External Exhaust Gas Residuals (EEGR) was applied to the SI engine. EEGR reduced ISNOx emissions and there was slight reduction in ISFC. However, when the engine was tested in CAI mode, both ISNOx and ISFC were lower than the SI engine.