Search Results

Water injection represents a promising tool to improve performance of spark-ignition engines. It allows reducing in-cylinder temperature, preventing knock risks. Optimizing the spark advance, water injection allows obtaining an increase of both efficiency and power output, particularly at medium and high loads. Water can be injected into the intake port or directly into the combustion chamber. In this paper, the authors investigated the effects of both direct and port water injection in a downsized PFI spark-ignition engine at high load operation. Different water-to-fuel ratios have been analyzed for both configurations. For the experimental analysis, low-pressure water injectors have been installed in the intake ports of the engine under study, upstream of the fuel injectors. Experimental tests have been carried out at various operating points. Furthermore, engine operation with port water injection has been simulated by means of the AVL Fire 3-D code.

A wider use of biofuels in internal combustion engines could reduce the emissions of pollutants and greenhouse gases from the transport sector. In particular, due to stringent emission regulatory programs, compression ignition engine requires interventions aimed at reducing their polluting emissions. Ethanol, a low carbon fuel generally produced from biomass, is a promising alternative fuel applicable in compression ignition engines to reduce CO2 and soot emissions. In this paper, the application of a dual fuel diesel-ethanol configuration in a light-duty compression ignition engine has been numerically investigated. Ethanol is injected into the intake port, while diesel fuel is directly injected into the combustion chamber of the analyzed engine. CFD simulations have been carried out by means of the AVL Fire 3-D code. The operation at given engine load and speed has been simulated considering different diesel injection timings.

In the field of gasoline turbocharged engines, the improvement of combustion efficiency represents a critical point when increased engine torque and reduced fuel consumption are simultaneously expected. Though gasoline port fuel injection is a well known and wide spread technology for fuel delivery in spark-ignition engines, detailed information on the features of the liquid fuel spray and the wall film formation could significantly contribute, in terms of emission control, to the engine development. In this paper, air-fuel mixture formation and smoke emissions of a turbocharged port-fuel-injected gasoline engine have been investigated by using experimental and numerical analysis techniques. The objective of this activity is to properly choose the injection system and strategy aimed to optimize both engine performance and emission levels. 3-D CFD calculations have been performed in order to deeply investigate the complex phenomena occurring before the combustion process starts.

In this paper, an experimental and numerical analysis of combustion process and knock occurrence in a small displacement spark-ignition engine is presented. A wide experimental campaign is preliminarily carried out in order to fully characterize the engine behavior in different operating conditions. In particular, the acquisition of a large number of consecutive pressure cycle is realized to analyze the Cyclic Variability (CV) effects in terms of Indicated Mean Effective Pressure (IMEP) Coefficient of Variation (CoV). The spark advance is also changed up to incipient knocking conditions, basing on a proper definition of a knock index. The latter is estimated through the decomposition and the FFT analysis of the instantaneous pressure cycles. Contemporary, a quasi-dimensional combustion and knock model, included within a whole engine one-dimensional (1D) modeling framework, are developed. Combustion and knock models are extended to include the CV effects, too.

Spark-ignition engines are characterized by poor levels of thermal efficiency, it is known, especially when running at partial load. Since part-load operating points are the most commonly used in engine average life, achieving a given torque value with small displacement, high mean effective pressure engines, the so-called “downsizing”, permits, in general, to limit some typical engine losses (for instance: pumping and friction losses), improving the fuel consumption in a wide range of engine operating points. Small displacement engines, usually, achieve high toque values thanks to supercharging techniques. In this paper, knock risks for a small displacement turbo-charged spark-ignition engine have been analyzed. A parametric analysis of numerous variable influencing engine performance and knock resistance has been carried out by means of 1-D numerical simulations.

Recently, it has been worth pointing out the relevance of alternative fuels in the improvement of air quality conditions and in the mitigation of global warming. In order to deal with these demands, in recent studies, it has been considered a great variety of alternative fuels. It goes without saying that the alternative fuels industry needs the best of the efficiency with a moderate layout. From this perspective, Liquefied Petroleum Gas (LPG) could represent a valid option, although it is not a renewable fuel. In terms of polluting emissions, the LPG can reduce nitrous oxides and smoke concentrations in the air, a capability that has a relevant importance for the modern pollution legislation. LPG is well known as an alternative fuel for Spark Ignition (SI) engines and, more recently, LPG systems have also been introduced in the Compression Ignition (CI) engines in dual-fuel configuration.