Refine Your Search

Search Results

Viewing 1 to 8 of 8
Technical Paper

A New Decoupled CFD and FEM Methodology for the Fatigue Strength Assessment of an Engine Head

2008-04-14
2008-01-0972
A 2200 cc engine head for marine applications has been analysed and optimized by means of decoupled CFD and FEM simulations in order to assess the fatigue strength of the component. The fluid distribution within the cooling jacket was extensively analysed and improved in previous works, in order to enhance the performance of the coolant galleries. A simplified methodology was then proposed in order to estimate the thermo-mechanical behaviour of the head under actual engine operation [1, 2]. As a consequence of the many complex phenomena involved, an improved approach is presented in this paper, capable of a better characterization of the fatigue strength of the engine head under both high-cycle and low-cycle fatigue loadings. The improved methodology is once again based on a decoupled CFD and FEM analysis, with relevant improvements added to both simulation realms.
Technical Paper

In-Cylinder Pressure Analysis through Accelerometer Signal Processing for Diesel Engine Combustion Optimization

2009-05-19
2009-01-2079
Many efforts are being currently devoted to the development of diagnostic techniques based on nonintrusive measurements aimed at defining the injection parameters able to optimize the combustion process. Previous papers of the authors have demonstrated a direct relationship between in-cylinder pressure and engine block vibration signals. Besides, it was also shown sensitivity of the engine surface vibration to variation of injection parameters, when the accelerometer is placed in sensitive location of the engine block. Moreover, in the accelerometer signal, a frequency band in which such a relationship is very strict has been selected. The aim of the present work is to establish a reliable relation between the main characteristics of the in-cylinder pressure curve and the vibration trend, by means of a deeper insight into the engine block signal. The final objective is to monitor the combustion behavior by means of a non-intrusive transducer.
Technical Paper

Block Vibration Measurements for Combustion Diagnosis in Multi-Cylinder Common Rail Diesel Engine

2009-04-20
2009-01-0646
A methodology has been developed by the authors, in which non-intrusive measurements (engine block vibration) are used for diagnostic purposes of combustion process in Diesel engines. A previous paper of the authors has been devoted to demonstrate the direct relationship between in-cylinder pressure and accelerometer signals, when the vibration transducer is placed in sensitive location. Moreover, in the engine block vibration a frequency band in which such a relationship is very strong has been selected. The aim of this work is to provide a deeper insight into the effects of injection parameters on engine block vibration, in order to investigate the possibility of detecting modification of the in-cylinder pressure evolution by means of the accelerometer signal with the final objective of optimizing the combustion process by means of non-intrusive transducer.
Technical Paper

Diesel Engine Combustion Monitoring through Block Vibration Signal Analysis

2009-04-20
2009-01-0765
The present work aims at developing and setting up a methodology in which non-intrusive measurements (engine block vibration) are used for monitoring combustion characteristics (combustion diagnosis, combustion development). The engine block vibration appears as a very complex signal in which different sources can be identified, since every moving component or physical process involved in the operation of the engine produces a vibration signal (exhaust valve open/close, inlet valve open/close, fuel injection, combustion, piston slap). Aimed at monitoring the engine running condition, the information carried by the vibration signal has to be broken down into its various contributions and then they have to be related to their respective excitation sources. Concerning combustion-induced vibration, experimental measures has been at first devoted to the selection of the best location where to place the piezoelectric accelerometer.
Technical Paper

Engine Block Vibration Measures for Time Detection of Diesel Combustion Phases

2009-09-13
2009-24-0035
This work fits into a research program in which the multi-cylinder diesel engine block vibration signal is used with the purpose of developing and setting up a methodology able to monitor and optimize the combustion behavior by means of non-intrusive transducer. Previously published results have demonstrated the direct relationship existing between in-cylinder pressure and engine block vibration signals in a fixed frequency band. It was also shown sensitivity of the engine surface vibration to variation of injection parameters, when the accelerometer is placed in sensitive location of the engine block. Moreover, the accelerometer trace has revealed to be able to locate in the crank–angle domain important phenomena characterizing the combustion process.
Technical Paper

Combustion Characterization in Diesel Engine via Block Vibration Analysis

2010-04-12
2010-01-0168
This paper presents the results of an experimental analysis on a multi-cylinder diesel engine, in which in-cylinder pressure and accelerometer transducers are used with the purpose of developing and setting up a methodology able to monitor and optimize the combustion behavior by means of non-intrusive measurements. Previously published results have demonstrated the direct relationship existing between in-cylinder pressure and engine block vibration signals, as well as the sensitivity of the engine surface vibration to variation of injection parameters when the accelerometer is placed in sensitive location of the engine block. Moreover, the accelerometer trace has revealed to be able to locate in the crank-angle domain important phenomena characterizing the combustion process (the start of pre-mixed combustion, the crank angle value corresponding to the beginning of diffusive combustion and to the in-cylinder pressure maximum value).
Technical Paper

Numerical Simulation of the Combustion Process of a High EGR, High Injection Pressure, Heavy Duty Diesel Engine

2017-09-04
2017-24-0009
To comply with Stage IV emission standard for off-road engines, Kohler Engines has developed the 100kW rated KDI 3.4 liters diesel engine, equipped with DOC and SCR. Based on this engine, a research project in collaboration between Kohler Engines, Ricardo, Denso and Politecnico di Torino was carried out to exploit the potential of new technologies to meet the Stage IV and beyond emission standards. The prototype engine was equipped with a low pressure cooled EGR system, two stage turbocharger, high pressure fuel injection system capable of very high injection pressure and DOC+DPF aftertreatment system. Since the Stage IV emission standard sets a 0.4 g/kWh NOx limit for the steady state test cycle (NRSC), that includes full load operating conditions, the engine must be operated with very high EGR rates (above 30%) at very high load.
Technical Paper

Thermo-Structural Analysis of a New Engine Cylinder Head

2011-09-11
2011-24-0165
An engine head for microcar applications has been analysed and optimized by means of uncoupled CFD and FEM simulations in order to assess the strength of the component. This paper deals with a structural stress analysis of the cylinder head considering the thermal loads computed through an uncoupled CFD simulations of cylinder combustion and in cooling flow passages. The FE model includes the contact interaction between the main parts of the cylinder head assembly and it also considers the effects of bolts tightening and valve springs. Temperature dependent non-linear material properties are considered. The results, in term of temperature field, are validated by comparing with those obtained by means of experimental analyses; the engine has been instrumented with thermocouples on crank case and on cylinder head.
X