Search Results

This paper presents the extended Kalman filter-based sideslip angle estimator design using a nonlinear 5DoF single-track vehicle dynamics model with stochastic modeling of tire forces. Lumped front and rear tire forces have been modeled as first-order random walk state variables. The proposed estimator is primarily designed for vehicle sideslip angle estimation; however it can also be used for estimation of tire forces and cornering stiffness. This estimator design does not rely on linearization of the tire force characteristics, it is robust against the variations of the tire parameters, and does not require the information on coefficient of friction. The estimator performance has been first analyzed by means of computer simulations using the 10DoF two-track vehicle dynamics model and underlying magic formula tire model, and then experimentally validated by using data sets recorded on a test vehicle.

In an authors' previous SAE publication, an energy management control strategy has been proposed for the basic, charge-depleting/charge-sustaining (CD/CS) regime of an Extended Range Electric Vehicle (EREV). The strategy is based on combining a rule-based controller, including a state-of-charge regulator, with an equivalent consumption minimization strategy. This paper presents an extension of the control strategy, which can provide a favorable vehicle behavior in the more general blended (BLND) operating regime, as well. Dynamic programming-based control variables optimization is first conducted to gain an insight into the vehicle optimal behavior in the BLND regime, facilitate the feedback control strategy development/extension, and serve as a benchmark for the control strategy verification. Next, a parameter optimization method is applied to find optimal values of critical engine on/off thresholds.

Driving cycles are typically used for estimation of vehicle fuel/energy consumption and CO2 emissions. In most of applications only the vehicle velocity vs. time profile is considered as a driving cycle, while a road slope is typically omitted. Since the road slope significantly impacts the fuel consumption, it should be included into realistic driving cycles for hilly roads. As a part of wider research of multidimensional driving cycle synthesis, this paper focuses on analysis of a broad city bus driving cycle dataset recorded in the city of Dubrovnik. The analysis is aimed at revealing the impact of road slope on velocity and acceleration distributions, and clustering the recorded data into several groups reflecting various driving and traffic congestion characteristics. Finally, the Markov chain method is employed to synthesize 3D driving cycles for the selected data clusters, where the Markov chain states include vehicle velocity, vehicle acceleration, and road slope.

The paper presents the estimator design procedures for automotive power train systems based on the adaptive Kalman filter. The Kalman filter adaptation is based on a simple and robust algorithm that detects sudden changes of power train variables. The adaptive Kalman filter has been used to estimate the SI engine load torque and air mass flow, and also the tire traction force and road condition. The presented experimental results indicate that proposed estimators are characterized by favorable response speeds and good noise suppression abilities.

This paper presents an adaptive extended Kalman filter (EKF)-based sideslip angle estimator, which utilizes a sensor fusion concept that combines the high-rate inertial sensors measurements with the low-rate GPS velocity measurements. The sideslip angle estimation is based on a vehicle kinematic model relying on the lateral accelerometer and yaw rate gyro measurements. The vehicle velocity measurements from low-cost, single antenna GPS receiver are used for compensation of potentially large drift-like estimation errors caused by inertial sensors offsets. Adaptation of EKF state covariance matrix ensures a fast convergence of inertial sensors offsets estimates, and consequently a more accurate sideslip angle estimate.

The bond graph method is used to model kinematics of various one-mode and two-mode series-parallel configurations of hybrid electric vehicle transmissions. Based on the derived speed and torque equations, a comparative analysis of hybrid transmissions steady-state behaviors is conducted. An example of control-oriented bond graph modeling of hybrid transmission dynamics is presented, as well.

The vehicle dynamics control systems are traditionally based upon utilizing wheel brakes as actuators. However, there has been recently strong interest in the automotive industry for introduction of other vehicle dynamics actuators, in order to improve the overall vehicle stability, responsiveness, and agility features. This paper considers various actuators such as active rear and central differentials and active front and rear steering, and proposes design of related yaw rate control systems. Different control subsystems such as reference model, feedback and feedforward control, allocation algorithm, and time-varying controller limit are discussed. The designed control systems are verified and compared by computer simulation for double lane change and slalom maneuvers.

This paper deals with a thorough analysis of using two fundamentally different algorithms for optimization of electric vehicle (EV) fleet charging. The first one is linear programming (LP) algorithm which is particularly suitable for solving linear optimization problems, and the second one is dynamic programming (DP) which can guarantee the global optimality of a solution for a general nonlinear optimization problem with non-convex constraints. Functionality of the considered algorithms is demonstrated through a case study related to a delivery EV fleet, which is modelled through the aggregate battery modeling approach, and for which realistic driving data are available. The algorithms are compared in terms of execution time and charging cost achieved, thus potentially revealing more appropriate algorithm for real-time charging applications.

The paper proposes an energy management control strategy for a Extended Range Electric Vehicle comprising an internal combustion engine, two electrical machines, and three clutches. The control strategy smoothly combines a rule-based strategy, extended with a battery state-of-charge (SoC) controller, with an instantaneous optimization algorithm based on equivalent consumption minimization strategy (ECMS). In addition to engine on/off logic, the rule based controller includes rules which are extracted from the global dynamic programming-based off-line optimization results. The control strategy is verified by means of computer simulation for different operating modes and certification driving cycles, and the simulation results are compared with the dynamic programming optimization results which are considered as globally optimal.

A dynamic programming-based algorithm is developed and used for off-line optimization of range extended electric vehicle power train control variables over standardized certification driving cycles. The aim is to minimize the fuel consumption subject to battery state-of-charge constraints and physical limits of different power train variables. The control variables to be optimized include engine torque and electric machine speed, as well as a variable that selects the power train operating mode. The optimization results are presented for four characteristic certification driving cycles and characteristic vehicle operating regimes including electric driving during charge depleting mode, hybrid driving during charge sustaining mode, and combined/blended regime.

Design and optimization of a plug-in hybrid electric vehicle (PHEV) control strategy is typically based on a backward-looking (BWD) powertrain model, which ensures a high computational efficiency by neglecting the powertrain dynamics. However, the control strategy developed for BWD model may considerably underperform when applied to a forward-looking (FWD) powertrain model, which includes a dynamic driver model, powertrain dynamics, and corresponding low-level controls. This paper deals with bond-graph based modelling and energy balance analysis of BWD and FWD powertrain models for a P2 parallel PHEV-type city bus equipped with a 12-speed automated manual transmission. The powertrain consists of a motor/generator (M/G) machine supplied by the lithium-ion battery and placed at the transmission input shaft, and an internal combustion engine which can be disconnected from the rest of the powertrain by a main clutch placed between the engine and M/G machine.

To enable smooth and low-risk autonomous driving in the presence of other road users, such as cyclists and pedestrians, appropriate predictive safe speed control strategies relying on accurate and robust prediction models should be employed. However, difficulties related to driving scene understanding and a wide variety of features influencing decisions of other road users significantly complexifies prediction tasks and related controls. This paper proposes a hierarchical neural network (NN)-based prediction model of pedestrian crossing behavior, which is aimed to be applied within an autonomous vehicle (AV) safe speed control strategy. Additionally, different single-level prediction models are presented and analyzed as well, to serve as baseline approaches.

Driving cycles are usually defined by vehicle speed as a function of time and they are typically used to estimate fuel consumption and pollutant emissions. Currently, certification driving cycles are mainly used for this purpose. Since they are artificially generated, the resulting estimates and analyzes can generally be biased. In order to address these shortcomings, recent research efforts have been directed towards development of statistically representative synthetic driving cycles derived from recorded real-world data. To this end, this paper focuses on synthesis of multidimensional driving cycles using the Markov chain-based method and particularly on their validation. The synthesis is based on Markov chain of fourth order, where the road slope is accounted, as well. The corresponding transition probability matrix is implemented in the form of a sparse matrix parameterized with a rich set of recorded city bus driving cycles.

Since the Extended range electric vehicle (EREV) powertrain structure is based on different power sources, a key vehicle design activity is related to development of an optimal control strategy for achieving a high fuel economy potential. The central role in developing an optimized energy management strategy is related to availability of computationally-efficient, high-fidelity EREV powertrain model. This paper proposes a method for developing an extended quasi-static backward-looking EREV powertrain model, which when compared to traditional backward model accounts for powertrain transient effects through additional fuel and battery state-of-charge consumptions. The effects of powertrain transients are characterized by means of extensive simulations of dynamic forward-looking EREV powertrain model covering a wide array of possible powertrain transient scenarios.