Search Results

An experimental analysis is carried out to investigate several heat transfer characteristics during the engine cycle, in the combustion chamber and exhaust manifold walls of a direct injection (DI), air-cooled, diesel engine. For this purpose, a novel experimental installation has been developed, which separates the engine transient temperature signals into two groups, namely the long-and the short- term response ones, processing the respective signals in two independent data acquisition systems. Furthermore, a new pre-amplification unit for fast response thermocouples, appropriate heat flux sensors and an innovative, object-oriented, control code for fast data acquisition have been designed and applied. Experimentally obtained cylinder pressure diagrams together with semi-empirical equations for instantaneous heat transfer were used as basis for the calculation of overall heat transfer coefficient.

Considering future emission legislation for HD diesel engines it is apparent that it will be probably necessary to employ A/T devices to achieve them. The main problem concerns the simultaneous control of both NOx and particulate emissions at an acceptable fuel penalty. Concerning particulate matter the use of particulate traps is considered to be a proven technology while for NOx emission control; various solutions exist mainly being the use of SCR catalysts or LNT devices. But LNT traps require periodical regeneration, which is accomplished by generating reducing agents i.e. CO and H2. The present investigation focuses on the regeneration of LNT devices through the engine operating cycle. This can be achieved using two techniques, additional injection of fuel at the exhaust manifold (external measures) or operation at low lambda values in the range of 1.0 or lower (internal measures).

Considering future emission legislation and the global thermal problem, two are the main issues that are of specific concern for the future of the diesel engine, specific gaseous pollutants and CO2 emissions. Both parameters are related to engine bsfc consumption directly or indirectly. The last is becoming even more important considering current fuel prices and the projection for the future indicating a trend for increasing fuel prices. The last decade significant improvement have been accomplished in the field of diesel engine efficiency that has resulted to considerable reduction of engine bsfc. It is obvious that despite improvements in diesel engine efficiency still a considerable amount of energy is rejected to the environment through the exhaust gas. Approximately 30-40% of the energy supplied by the fuel is rejected to the ambience.

In this paper, the results are presented from the analysis of the second stage of an experimental investigation with the aim to provide insight to the cyclic, instantaneous heat transfer phenomena occurring in both the cylinder head and exhaust manifold wall surfaces of a direct injection (DI), air-cooled diesel engine. Results from the first stage of the investigation concerning steady-state engine operation have already been presented by the authors in this series. In this second stage, the mechanism of cyclic heat transfer was investigated during engine transient events, viz. after a sudden change in engine speed and/or load, both for the combustion chamber and exhaust manifold surfaces. The modified experimental installation allowed both long- and short-term signal types to be recorded on a common time reference base during the transient event.

In the present work is presented a detailed evaluation of an advanced diagnostic technique, developed by the authors, for the determination of diesel engine condition and tuning. For this purpose, an extended experimental investigation has been conducted on a prototype test engine installed in the author's laboratory. During the measurements various operating parameters (i.e. torque, fuel consumption, injection pressure, cylinder pressure, peripheral temperatures etc.) have been recorded at various operating conditions (i.e. engine speed and loads). Initially the engine operated at its normal conditions (i.e. reference state). Then, two “virtual” faults (i.e. reduction of injector opening pressure and increase of cylinder mass leakage) were introduced, that affected engine operation.

Thermodynamic, dynamic and design parameters have a significant and often conflicting impact on the transient response of a compression ignition engine. Knowing the contribution of each parameter on transient operation could direct the designer to the appropriate measures for better engine performance. To this aim an explicit simulation program developed is used to study the performance of a turbocharged diesel engine operating under transient load conditions. The simulation developed, based on the filling and emptying approach, provides various innovations as follows: Detailed analysis of thermodynamic and dynamic differential equations, on a degree crank angle basis, accounting for the continuously changing nature of transient operation, analysis of transient mechanical friction, and also a detailed mathematical simulation of the fuel pump. Each equation in the model is solved separately for every cylinder of the 6-cylinder diesel engine considered.

In the present paper a new method is proposed for the analysis of the two main phases of the engine exhaust stroke blowdown and displacement. The method is based on the processing of fast-response experimental temperatures obtained from the exhaust manifold wall during the engine cycle. A novel experimental installation has been developed, which separates the engine transient temperature signals into two groups, namely the long- and the short- term response ones. This has been achieved by processing the respective signals acquired from two independent data acquisition systems. Furthermore, a new pre-amplification unit for fast response thermocouples, appropriate heat flux sensors and an innovative, object-oriented, control code for fast data acquisition have been designed and applied. For the experimental procedure a direct injection (DI), air-cooled diesel engine is used.