Search Results

Ignition process chemistry was analyzed using a detailed chemical kinetic model of n-heptane generated by KUCRS (Knowledge-basing Utilities for Complex Reaction Systems), wherein pressure-dependent rate constants of the O₂ addition to alkyl radicals and hydroperoxy alkyl radicals and the thermal decomposition of ketohydroperoxides have been introduced. Then, the effect of the initial pressure and the individual effects of the initial fuel, O₂ and N₂ molar concentrations on a relationship between the initial temperature and the ignition delay were discussed. When the initial temperature increases, the branch of C₇H₁₄OOH removal into the second O₂ addition and the decomposition into C₇H₁₄cyO and OH is more sensitive to the pressure and the O₂ concentration, and thus, the LTO preparation phase is more affected by the pressure and the O₂ concentration. The LTO phase terminates mainly by the OH removal by intermediate species.

The interaction between spark discharge and low-temperature oxidation (LTO) was investigated using an optical compression and expansion machine fueled with n-C7H16 or i-C8H18 for an equivalence ratio of 0.33. Charge pressure was adjusted so that the compression stoke could induce LTO for n-C7H16, but could not lead to high-temperature reactions. A spark was discharged in the field before, during, or after the LTO for n-C7H16 or in the field without LTO for i-C8H18. Reaction zones were induced in the field after the LTO, whereas no reaction zones were induced in the fields before the LTO and without LTO. Local ignitions were induced in the areas surrounding the propagating reaction zones. The reaction zone propagation with the low equivalence ratio must be a different phenomenon from conventional flame propagation. The reaction zones can compress or heat the surrounding areas containing H2O2 and CH2O, and accelerate an H2O2 regeneration loop in the pre-reaction zones.

One of the authors has proposed to use the decay rate of EHRR, the effective heat release rate, d2Q/dθ2 as an index for the rapid local combustion [1]. In this study, EHRR profiles and the cylinder gas pressure oscillations of the low and high speed knock are analyzed by using this index. A delayed rapid local combustion, such as an autoignition with small burned mass fraction can be detected. In the cases of the low speed knock, it has been agreed that a rapid local combustion is an autoignition. Although whether the cylinder gas oscillation is provoked by an auto ignition in a certain cycle or not is an irregular phenomenon, the auto ignition takes place in almost all of the cycles in the knocking condition. Mixture mass fraction burned by an auto ignition is large. A small auto ignition may induce a secondary auto ignition, in many cases, mass burned by the secondary auto ignition is extremely large.