Search Results

Hydrogen is a reactive species involved with many combustion and catalysis reactions. Traditionally studies on hydrogen relied on theoretical calculation of engine out emissions. This study used a mass spectrometer to measure hydrogen emissions at engine out and tailpipe for a port fuelled injection (PFI) gasoline vehicle. Comparison of measured with calculated for engine out hydrogen showed good agreement. However, catalyst ageing affected post catalyst hydrogen levels to an extent that would be difficult to model by calculation. Study shows that for a detailed understanding of the influence of hydrogen on combustion and catalyst performance the preferred approach is measurement rather than calculation.

The emissions performance of a prototype close-coupled catalyst system has been analysed and compared with semi-close-coupled and underfloor systems. Under certain engine conditions during the stabilized region of the ECE Stage 3 drive-cycle, the close-coupled system has showed higher emissions than the semi-close-coupled or underfloor configurations. Using fast response emissions analysers and catalyst warm-up characteristics in conjunction with Computational Fluid Dynamics (CFD), the reasons for this emissions performance deficit has been attributed to flow maldistribution across the front face of the catalyst. Two flow distribution-related mechanisms for emissions breakthrough have been isolated: radial variations in mean AFR (Air-Fuel Ratio) across the catalyst can cause localized emissions breakthrough due to cylinder-to-cylinder AFR variations; and under high space velocity conditions, localized breakthrough can occur due to radial variations in gas velocity through the catalyst.

Using local emissions measurements immediately downstream of a close-coupled catalyst, spatial variations in emissions have been analysed for close-coupled catalysts with different ageing histories. Comparison of the radial emissions profiles between a uniformly-aged (oven-aged) catalyst and two vehicle-aged parts suggests that the vehicle-aged parts have substantial variations in catalyst damage across the radius of the catalyst. The radial variations in damage were confirmed by bench reactor and post-mortem studies. The radial catalyst damage profiles inferred from engine-based evaluations of vehicle aged catalysts show broad correlation with high flow areas identified by CFD predictions and high temperature regions as measured during engine tests.