Search Results

In the automotive field, reducing harmful pollutant, CO2 emissions and fuel consumption of vehicles while increasing customer comfort is a continuous challenge that requires more and more sophisticated technology implementations. However, it is often difficult to anticipate the advantages and drawbacks of a technology without having its prototype parts and/or knowing the optimal control strategy. In order to meet these challenges, the authors have developed a vehicle thermal model in AMESim platform to evaluate the benefits of an Active Grille Shutter (AGS) on fuel economy when applied. The vehicle model was based on a C-Segment vehicle powered by a 1.4L Diesel engine. The complete oil and coolant circuits were modeled as well as a friction model based on engine coolant and oil temperature.

To meet future stringent emission regulations such as Euro6, the design and control of diesel exhaust after-treatment systems will become more complex in order to ensure their optimum operation over time. Moreover, because of the strong pressure for CO₂ emissions reduction, the average exhaust temperature is expected to decrease, posing significant challenges on exhaust after-treatment. Diesel Oxidation Catalysts (DOCs) are already widely used to reduce CO and hydrocarbons (HC) from diesel engine emissions. In addition, DOC is also used to control the NO₂/NOx ratio and to generate the exothermic reactions necessary for the thermal regeneration of Diesel Particulate Filter (DPF) and NOx Storage and Reduction catalysts (NSR). The expected temperature decrease of diesel exhaust will adversely affect the CO and unburned hydrocarbons (UHC) conversion efficiency of the catalysts. Therefore, the development cost for the design and control of new DOCs is increasing.

The effects of fuel injection conditions (injection pressure, nozzle orifice diameter and fuel injection quantity) on NOx formation in direct-injection Premixed Charge Compression Ignition (DI-PCCI) combustion were investigated using a constant-volume vessel and a total gas-sampling device. The results show that promotion of fuel-air mixing reduces final NOx mass accompanying a delayed hot flame. In particular, under low oxygen mole fraction conditions, in addition to the hot flame delay, the promotion of fuel-air mixing results in a lower heat release rate. In this case, the final NOx mass is further reduced. For a fixed nozzle orifice diameter, the final NOx mass is reduced with increasing injection pressure. This effect is remarkable for smaller nozzle orifice diameters. Regardless of the oxygen mole fraction, under the low injection fuel quantity condition, enhancement of fuel-air mixing reduces the final NOx mass per released heat.

The aim of this study is to find strategies for fully utilizing the advantage of diesel-ethanol blend fuel in recent diesel engines. For this purpose, experiments were performed using a single-cylinder direct injection diesel engine equipped with a high-pressure common rail injection and a cold EGR system. The results indicate that significant PM reduction at high engine loads can be achieved using 15% ethanol-diesel blend fuel. Increasing injection pressure promotes PM reduction. However, poor ignitability of ethanol blended fuel results in higher rate of pressure rise at high engine loads and unstable and incomplete combustion at lower engine loads. Using pilot injection with proper amount and timing solves above problems. NOx increase due to the high injection pressure can be controlled employing cold EGR. Weak sooting tendency of ethanol-blend fuel enables to use high EGR rates for significant NOx reduction.

Utilizing the desirable feature of hydrogen, this study demonstrates the improvement of engine performance and exhaust emissions due to the mixing of hydrogen into natural-gas fuel in a spark-ignition engine at the wide-open throttle (WOT) condition. Both hydrogen and natural-gas fuels were injected into the intake port only in the suction flow, which could make the operation under a wide range of conditions without backfire even at a hydrogen fuel. Based on the measured processes of combustion, the knock characteristics were discussed with special attention to the extremely high burning velocity of hydrogen. At a higher compression ratio, the thermal efficiency in the stoichiometric condition was improved, nevertheless a precise control of ignition timing was required to suppress a hard knock. From the experimental results of engine performance in a variety of parameters, optimal use of hydrogen was exhibited for different engine loads.

The Premixed Charge Compression Ignition (PCCI) natural-gas engine has been investigated extensively as a power source for stationary applications due to its potential for high thermal efficiency and very low NOx emissions. However, methane, which is a major component of natural gas, has a high auto-ignition temperature. Stable ignition of natural gas in PCCI engines can be achieved by high compression ratio, intake air heating, internal EGR and various other techniques. Although each of the above-mentioned methods shows positive effects, to some extent, on engine performance and emissions, the literature indicates that stable operation of the PCCI natural gas engine would require a combination of various techniques, which reveals the need for further investigation. The goal of the present study is to control the PCCI natural gas ignition and combustion by ozone addition into the intake air.

Utilization of ethanol-diesel blend fuels in partial Premixed Charge Compression Ignition (PCCI) combustion was attempted to achieve clean diesel engine. The experiment was carried out using a naturally aspirated single cylinder DI diesel engine equipped with common rail injection and cooled EGR systems. PCCI combustion was realized by two stage injection in which part of fuel was injected during the compression stroke and the rest near TDC. The results indicate that under middle to high engine loads, both weak sooting tendency and low cetane number of ethanol blend fuels offer a great improvement in PM and NOx emissions when compared to the diesel combustion with ordinary pilot injection. However, this results in penalties in thermal efficiency, THC and CO emissions.

Ethanol is a bio-based renewable and oxygenated fuel, thereby providing potential to reduce the PM emission in diesel engines and to provide reduction in life cycle CO2. There are several studies which report improvement in the engine performance using ethanol blend fuels. However, most of these studies are carried out using diesel engines with basic combustion control technologies. Therefore, it is doubtful whether a diesel engine fuelled with ethanol blend fuels can compete with the recently developed clean diesel engines. From another point of view, it is important to know whether it is possible to overcome the disadvantages of ethanol blend fuels using modern diesel engines. The aim of this study is to find strategies for fully utilizing the advantages of diesel-ethanol blends in the recent diesel engines. For this purpose, experiments were performed using a single-cylinder DI diesel engine equipped with common rail injection and cold EGR systems.

Aim of this study is to clarify the NOx formation mechanism in diesel combustion under high-supercharged condition. Effects of ambient conditions and fuel injection parameters on diesel combustion were investigated using a constant volume chamber. NOx formation process was investigated using a total gas-sampling device. The results indicate that by using the above experimental setup it is possible to realize entirely diffusion combustion like what seen in the highly supercharged condition. Increasing ambient pressure up to 8MPa with high injection pressure shortens the ignition delay and offers a heat release rate proportional to the fuel injection rate with a short combustion duration. Increasing ambient pressure gives a higher NOx formation rate and final NOx concentration. This is due to enhancement in the fuel-air mixing which promotes the heat release.