Search Results

Increasingly restrictive emission standards and CO2 targets drive the need for innovative engine architectures that satisfy the design constraints in terms of performance, emissions and drivability. Downsizing is one major trend for Spark-Ignition (SI) engines. For downsized SI engines, the increased boost levels and compression ratios may lead to a higher propensity of abnormal combustions. Thus increased levels of Exhaust Gas Recirculation (EGR) are used in order to limit the appearance of knock and super-knock. The drawback of high EGR rates is the increased tendency for Cycle-to-Cycle Variations (CCV) it engenders. A possible way to reduce CCV could be the generation of an increased in-cylinder turbulence to accelerate the combustion process. To manage all these aspects, 1D simulators are increasingly used. Accordingly, adapted modeling approaches must be developed to deal with all the relevant physics impacting combustion and pollutant emissions formation.

Large Eddy Simulation (LES) appears today as a prospective tool for engine study. Even if recent works have demonstrated the feasibility of multi-cycle LES, they have also pointed out a lack of detailed experimental data for validation as well as for boundary condition definition. The acquisition of such experimental data would require dedicated experimental set-ups. Nevertheless, in future industrial applications, unconditional dedicated experimental set-ups will not be the main stream. To overcome this difficulty, a methodology is proposed using system simulation to define fluid boundary conditions (crank-resolved intake/exhaust pressures and temperatures) and wall temperatures. The methodology combines system simulation for the whole experimental set-up and LES for the flow in the combustion chamber as well as a part of the intake and exhaust ducts. System simulation provides the crank-resolved temperature and pressure traces at the LES mesh inlet and outlet.

The development of the Large Eddy Simulation (LES) 3D CFD code AVBP to yield a CFD tool able to predict cyclic variability in Internal Combustion (IC) engines is reported. In a first step the implementation of an Arbitrary Lagrangian Eulerian (ALE) method into AVBP is described, allowing to move solid boundaries. Then the principles and implementation of the Conditioned Temporal Interpolation (CTI) mesh management technique is described, and some specific adaptations for LES simulations are discussed. Finally a first validation of the so obtained LES IC engine code is presented by comparing predictions with findings on the square piston experiment.

This study presents a preliminary application of Large-Eddy Simulations (LES) of a speed transient performed on a motored single-cylinder engine. The numerical setup follows a methodology which has been validated and optimized for stabilized operating points in previous work, and adapted to run a speed transient of 31 cycles, from 1000 to 1800 rpm. Analysis of the results contributes to characterize the impact of the transient on the engine charge, tumble motion and velocity distribution. These simulations, which have never been performed in the past (to the best of our knowledge), represent a decisive step towards modeling and understanding transient in GDI engines, and particularly their impact on soot particle emissions in real driving conditions.