Search Results

Many efforts are being currently devoted to the development of diagnostic techniques based on nonintrusive measurements aimed at defining the injection parameters able to optimize the combustion process. Previous papers of the authors have demonstrated a direct relationship between in-cylinder pressure and engine block vibration signals. Besides, it was also shown sensitivity of the engine surface vibration to variation of injection parameters, when the accelerometer is placed in sensitive location of the engine block. Moreover, in the accelerometer signal, a frequency band in which such a relationship is very strict has been selected. The aim of the present work is to establish a reliable relation between the main characteristics of the in-cylinder pressure curve and the vibration trend, by means of a deeper insight into the engine block signal. The final objective is to monitor the combustion behavior by means of a non-intrusive transducer.

A methodology has been developed by the authors, in which non-intrusive measurements (engine block vibration) are used for diagnostic purposes of combustion process in Diesel engines. A previous paper of the authors has been devoted to demonstrate the direct relationship between in-cylinder pressure and accelerometer signals, when the vibration transducer is placed in sensitive location. Moreover, in the engine block vibration a frequency band in which such a relationship is very strong has been selected. The aim of this work is to provide a deeper insight into the effects of injection parameters on engine block vibration, in order to investigate the possibility of detecting modification of the in-cylinder pressure evolution by means of the accelerometer signal with the final objective of optimizing the combustion process by means of non-intrusive transducer.

The present work aims at developing and setting up a methodology in which non-intrusive measurements (engine block vibration) are used for monitoring combustion characteristics (combustion diagnosis, combustion development). The engine block vibration appears as a very complex signal in which different sources can be identified, since every moving component or physical process involved in the operation of the engine produces a vibration signal (exhaust valve open/close, inlet valve open/close, fuel injection, combustion, piston slap). Aimed at monitoring the engine running condition, the information carried by the vibration signal has to be broken down into its various contributions and then they have to be related to their respective excitation sources. Concerning combustion-induced vibration, experimental measures has been at first devoted to the selection of the best location where to place the piezoelectric accelerometer.

This paper presents the results of an experimental analysis on a multi-cylinder diesel engine, in which in-cylinder pressure and accelerometer transducers are used with the purpose of developing and setting up a methodology able to monitor and optimize the combustion behavior by means of non-intrusive measurements. Previously published results have demonstrated the direct relationship existing between in-cylinder pressure and engine block vibration signals, as well as the sensitivity of the engine surface vibration to variation of injection parameters when the accelerometer is placed in sensitive location of the engine block. Moreover, the accelerometer trace has revealed to be able to locate in the crank-angle domain important phenomena characterizing the combustion process (the start of pre-mixed combustion, the crank angle value corresponding to the beginning of diffusive combustion and to the in-cylinder pressure maximum value).

A predictive technique aimed at investigating the behaviour of intake and exhaust systems of internal combustion engine and at evaluating their influence on engine breathing and radiated noise is herewith presented. Such a technique is based on coupling a time domain gas dynamic model (composed of zero-dimensional, one-dimensional and three-dimensional methods) with a frequency domain linear acoustic analysis (transfer matrix method); thus a realistic prediction of complete engine systems is realised by adopting in each region the most appropriate method, according to the main features of the phenomena involved. The whole procedure has been applied to the intake system of an automotive engine and the results regarding different operative conditions are presented.

The optimization of the combustion process in diesel engines is one of the challenges to improve performance, emissions, fuel consumption and NVH characteristics. This work constitutes one of the last steps of a comprehensive research program in which vibration sensors are used with the purpose of developing and setting up a methodology that is able to monitor and optimize the combustion process by means of non-intrusive measurements. Previously published results have demonstrated the direct relationship that exists between in-cylinder pressure and engine block vibration signals, as well as the sensitivity of the engine surface vibration to variation of injection parameters when the accelerometer is placed in a sensitive location of the engine block.

The paper presents a non-intrusive technique in which accelerometers are used to provide information about the metric of the in-cylinder pressure development, with the final aim of using their signal as feedback in a control algorithm for the injection control unit. Previous papers by the authors have been devoted to the evaluation of the potential of using vibration transducers; the analysis in both the time and frequency domain of the accelerometer and in-cylinder pressure signals has allowed for the separation of the vibration components caused by the combustion process from those due to other sources. The combustion related vibration has then been used to characterize the in-cylinder pressure development.

In the last years, the increasing concern for the environmental issues of IC engines has promoted the development of new strategies capable of reducing both pollutant emissions in atmosphere and noise radiation. Engines can produce different types of noise: 1) aerodynamic noise due to intake and exhaust systems and 2) surface radiated noise. Identification and analysis of noise sources are essential to evaluate the individual contribution (injection, combustion, piston slap, turbocharger, oil pump, valves) to the overall noise with the aim of selecting appropriate control strategies. Previous paper focused on the combustion related noise emission. The research activity aimed at diagnosing and controlling the combustion process via acoustic measurements. The optimal placement of the microphone was selected, where the signal was strongly correlated to the in-cylinder pressure development during the combustion process.