Search Results

Experiments were conducted to determine the effect of accelerated aging on LNT-SCR system performance. The systems were aged and evaluated on an engine dynamometer using a DW12 2.2L I4 Diesel. The aging consisted of three modes, including sulfur exposure, desulfation (deSOx), and DPF regeneration conditions. Two systems were aged using different desulfation protocols and then evaluated over steady-state cycling conditions. The sulfur release characteristics were measured. Overall system gross NOx conversion was robust to the aging protocol; however, there were significant differences in the individual component performance depending on the nature of the aging conditions. LNT NOx conversion was significantly lower for the case where maximum temperatures reached only 730°C, as opposed to the more severe aging where temperatures reached 800°C.

An investigation into the post-LNT NH3 generation and NOx slip over an LNT was completed for the purposes of determining the proper calibration for NOx reduction over a downstream SCR. Experiments were conducted in an engine dynamometer on the DW12 2.2L diesel engine that was calibrated for rich operation. The catalyst system was evaluated at 325°C for three different engine speed/load points. Engine speeds of 1750, 2000, and 2500 rpm were chosen, resulting in a LNT space velocities of 35,000 - 68,000 hr-1. Increased lean times were tested, which resulted in NOx loadings on the LNT that ranged from 0.10 - 0.50 grams NOx/L catalyst. In addition, varied degrees of richness were tested, corresponding to lambda sensor readings of 0.90, 0.92, and 0.94. LNT performance was evaluated based on it's ability to provide a stoichiometric ratio of reactants to the SCR for NOx conversion. Gross and net NOx conversion was evaluated for a LNT-SCR system.