Search Results

As part of an ongoing investigation, the influence of In Cylinder Pressure (ICP) and fuel injection pressure on the soot formation processes in a diesel fuel spray were studied. The work was performed using a rapid compression machine at ambient conditions representative of a modern High Speed Direct Injection diesel engine, and with fuel injection more representative of full load. Future tests will aim to consider the effects of pilot injections and EGR rates. The qualitative soot concentration was determined using the Laser Induced Incandescence (LII) technique both spatially and temporally at a range of test conditions. Peak soot concentration values were determined, from which a good correlation between soot concentration and injection pressure was observed. The peak soot concentration was found to correlate well with the velocity of the injected fuel jet.

The influences of injector nozzle geometry, injection pressure and ambient air conditions on a diesel fuel spray were examined using back-lighting techniques. Both stills and high speed imaging techniques were used. Operating conditions representative of a modern turbocharged aftercooled HSDI diesel engine were achieved in an optical rapid compression machine fitted with a common rail fuel injector. Qualitative differences in spray structure were observed between tests performed with short and long injection periods. Changes in the flow structure within the nozzle could be the source of this effect. The temporal liquid penetration lengths were derived from the high-speed images. Comparisons were made between different nozzle geometries and different injection pressures. Differences were observed between VCO (Valve Covers Orifice) and mini-sac nozzles, with the mini-sac nozzles showing a higher rate of penetration under the same conditions.

Rail pressures of modern diesel fuel injection systems have increased significantly over recent years, greatly improving atomisation of the main fuel injection event and air utilisation of the combustion process. Continued improvement in controlling the process of introducing fuel into the cylinder has led to focussing on fluid phenomena related to transient response. High-speed microscopy has been employed to visualise the detailed fluid dynamics around the near nozzle region of an automotive diesel fuel injector, during the opening, closing and post injection events. Complementary computational fluid dynamic (CFD) simulations have been undertaken to elucidate the interaction of the liquid and gas phases during these highly transient events, including an assessment of close-coupled injections.