Search Results

A comprehensive study is carried out in order to better understand combustion behavior in a direct injection Diesel engine working under multiple injection strategies, in particular when using post-injections. The aim of the study is to provide criteria to more easily define optimized injection strategies. During the study two main phenomena have been observed and characterized: an acceleration of the final stage of combustion and an apparent disconnection between the combustions of the two pulses (“split flame”). Thanks to the combustion acceleration phenomenon, if the post-injection is placed near enough the main injection, the end of combustion can take place even earlier compared to the case with a single main injection. In such conditions NOx emissions increase (most likely due to a higher temperature level during the last stage of combustion), but soot and specific fuel consumption decrease (due to a faster last phase of combustion).

In this paper the effect of the engine load and the EGR (exhaust gas recirculation) rate on the combustion process and the pollutant emissions when using RME (rapeseed methyl-ester) is investigated. For this purpose a parametric study in a single-cylinder HSDI (high speed direct injection) engine in a wide range of operating conditions (thus trying to maximize the generality of the results) has been carried out. All the output parameters are compared with the corresponding ones for a reference diesel fuel at equivalent engine performances and operating conditions. To perform a rigorous comparison, a specific methodology has been designed based on the comparison at equivalent engine load and oxygen mass fraction in the intake manifold, so as to remove the effect of the fuel properties (derived from the different oxygen content, mainly) on the engine performances.

The effects of wall interaction on combustion and soot formation processes of a diesel fuel jet were investigated in an optically-accessible constant-volume combustion vessel at experimental conditions typical of a diesel engine. At identical ambient and injector conditions, soot processes were studied in free jets, plane wall jets, and “confined” wall jets (a box-shaped geometry simulating secondary interaction with adjacent walls and jets in an engine). The investigation showed that soot levels are significantly lower in a plane wall jet compared to a free jet. At some operating conditions, sooting free jets become soot-free as plane wall jets. Possible mechanisms to explain the reduced or delayed soot formation upon wall interaction include an increased fuel-air mixing rate and a wall-jet-cooling effect. However, in a confined-jet configuration, there is an opposite trend in soot formation.

In the present paper, the use of a 2-stroke (2S) concept in an automotive gasoline engine is evaluated. In a first stage, the engine architecture chosen is discussed. Taking into account the requirements in gas exchange processes, a uniflow scavenging design was retained (intake ports in the cylinder, controlled by the piston; exhaust valves in the cylinder head, controlled by a Variable Valve Timing, VVT, system), performed by an external blower driven by the crankshaft. To avoid any fuel short-circuiting and to keep an acceptable cost, a direct injection (DI) air-assisted fuel injection system was selected. Since the engine behavior is much more complex compared to a classical 4-stroke engine, some complexity in the engine design needs to be added to allow engine optimization at the different operating conditions. This is the main reason why a VVT system, as well as a flexible fuel injection system were selected. In a second stage, the chosen engine concept is evaluated.