Search Results

Exhaust noise from engines is one of component noise pollution to the environment. Exhaust systems are developed to attenuate noise meeting required db (a) levels and sound quality, emissions based on environment norms. Hence this has become an important area of research and development. Most of the advances in theory of acoustic filters and exhaust mufflers have been developed in last two decades. Mufflers are important part of engine system and commonly used in exhaust system to minimize sound transmissions caused by exhaust gases. Design of mufflers is a complex function that affects noise characteristics, emission and fuel efficiency of engine. Therefore muffler design becomes more and more important for noise reduction. Traditionally, muffler design has been an iterative process by trial and error. However, the theories and science that has undergone development in recent years has given a way for an engineer to cut short number of iteration.

The Bogie suspensions ensure better stability at higher loads and also give the utmost reliability under extreme climatic conditions with minimum maintenance. Many vehicle manufactures have adopted for the bogie suspension at rear based on its advantages. The noises generated from the vehicle in the field includes engine noises and flow noises and hence it is very difficult to clearly discern the noise generated from suspension system of the vehicle [1]. Most suspension system noises do not come from a single part but they are caused by the coupling action between related parts, making it difficult to clearly identify the exact cases. This paper details the overall approach to identify the bogie suspension noise on a commercial vehicle and countermeasures to reduce the same.

Transfer function measurements are the basis for construction of conventional test based source-path-receiver model of a vehicle. Interior noise of a vehicle can be synthesized using source excitation (both acceleration at source and near source sound pressure level) and its corresponding transfer function (Vibro-Acoustic Transfer Function (VATF) and Acoustic Transfer Function (ATF) respectively) to the interior of vehicle. Ideally ATF should be linear and independent of sound source, dependent only on size of air cavities, body structure and its material characteristics in between receiver and source location. But practically because of the type of excitation signal used to excite the sound source and characteristics of sound source itself, there is a possibility of variations in amplitude of acoustic transfer function.

Pass-By-Noise (PBN) requirements area an important aspect of NVH development of a commercial vehicle. The PBN on an Intermediate commercial vehicle (ICV) with refrigerator container was the subject of this study. This vehicle emitted PBN greater than accepted threshold due to its configuration. The overall approach to identify the sources and contributors for PBN was to test the vehicle in its baseline condition as well as with improvements. Near source noise measurements were performed at all potential noise contributors. A windowing technique was used to identify the potential noise sources. This Windowing technique is the exposing of each individual noise source while keeping all others shielded. This technique is reliable and quickly reveals significant noise contributors. Improvements to noise sources were reviewed for effectiveness to the overall PBN and overall recommendations were made.