Search Results

Two optical techniques were developed and combined with a CFD simulation to obtain spatio-temporally resolved information on air/fuel mixing in the cylinder of a methane-fueled, fired, optically accessible engine. Laser-induced fluorescence (LIF) of anisole (methoxybenzene), vaporized in trace amounts into the gaseous fuel upstream of the injector, was captured by a two-camera system, providing one instantaneous image of the air/fuel ratio per cycle. Broadband infrared (IR) absorption by the methane fuel itself was measured in a small probe volume via a spark-plug integrated sensor, yielding time-resolved quasi-point information at kHz-rates. The simulation was based on the Reynolds-averaged Navier-Stokes (RANS) approach with the two-equation k-epsilon turbulence model in a finite volume discretization scheme and included the port-fuel injection event. Commercial CFD software was used to perform engine simulations close to the experimental conditions.

Late-evaporating liquid fuel films within the combustion chamber are considered a major source of soot in gasoline direct-injection engines. In this study a direct-injection model experiment was developed to visualize and investigate the evaporation of fuel films and their contribution to soot formation with different diagnostic techniques. A mixture of isooctane (surrogate fuel) and toluene (fluorescent tracer) is injected by a multi-hole injector into a wind tunnel with an optically accessible test section. Air flows continuously at low speed and ambient pressure through the test section. Some of the liquid fuel impinges on the quartz-glass windows and forms fuel films. Combustion is initiated by a pair of electrodes within the fuel/air-mixture. The turbulent flame front propagates through the chamber and ignites pool fires near the fuel films, leading to locally sooting combustion.