Search Results

In the present work, the in-cylinder tumble/swirl flow and its effect on the homogeneity, turbulence, and combustion of methane are investigated in a canted valve engine using ANSYS. The study is focused on the impact of initial swirl and tumble on the charge preparation, turbulent kinetic energy, and combustion of methane. The flow simulation was performed in ANSYS using hybrid mesh for cold flow simulation to study the tumble/swirl flow variation. For combustion simulation, a 2D axisymmetric model was used with an initial swirl and tumble ratio for studying the effect on premixed combustion. The flow simulation was performed for suction and compression to see the variation in the swirl and tumble with crank position and engine speed. The combustion simulation was performed only for compression and power stroke to save the computation time. The results depict that the flow inside the cylinder plays a significant role in the preparation of a homogeneous charge.

Homogeneous Charge Compression Ignition (HCCI) offers great promise for excellent fuel economy and extremely low emissions of NOx and PM. HCCI combustion lacks direct control on the "start of combustion" such as spark timing in SI engines and fuel injection timing in CI engines. Auto ignition of a homogeneous mixture is very sensitive to operating conditions of the engine. Even small variations of the load can change the timing from "too early" to "too late" combustion. Thus a fast combustion phasing control is required since it sets the performance limitation of the load control. Crank angle position for 50% heat release is used as combustion phasing feedback parameter. In this study, a dual-fuel approach is used to control combustion in a HCCI engine. This approach involves controlling the combustion heat release rate by adjusting fuel reactivity according to the conditions inside the cylinder. Two different octane fuels (methanol and n-heptane) are used for the study.

Research in the utilization of hydrogen and syngas has significantly increased due to their clean-burning properties and the prospect of production from several renewable resources. Homogeneous charge compression ignition (HCCI) engine is low-temperature combustion (LTC) concept which combines the best features of conventional spark-ignition (SI) and compression-ignition (CI) engines. HCCI combustion engine has shown the potential for higher efficiency and ultralow NOx and soot emissions. In this study, syngas fueled HCCI combustion is simulated using stochastic reactor model (SRM) with a detailed chemical kinetic mechanism (32 species and 173 reactions). Detailed syngas oxidation mechanism included NOx reactions also. In SRM models physical parameters are described by a probability density function (PDF). These parameters does not vary within the combustion chamber, and thus the spatial distribution (due to local inhomogeneity’s) of the charge is represented in terms of a PDF.

Cyclic variations are inherent in the combustion of internal combustion engines. However, extreme cyclic combustion variations limit the operation of spark-ignition (SI) engines, particularly at highly lean and diluted charge operation. Lean charge operation is desired due to its expected benefits in fuel efficiency and engine-out NOx and HC emissions. Studies suggested the existence of the low-dimensional deterministic nature of cyclic variations, which is essential from the perspective of designing a high-frequency controller. The lean limit of a SI engine operation may be extended by controlling the deterministic component of cyclic variations to meet the future strict emissions and fuel economy regulations. This paper presents a review of the evolution of the experimental and analytical understanding of cyclic combustion variations of spark-ignition engines.

Engine design and selection of fuels for automotive applications are required to minimize noise and exhaust emissions without compromising fuel economy. The knocking combustion investigation is essential as it directly affects the performance and durability as well as the thermal efficiency of the engine. Several fuel additives were suggested in the previous studies to mitigate the knocking combustion in spark ignition (SI) engines. The present study reviews the effect of antiknock fuel additives such as ethanol, methanol, prenol, n-butanol, furan mixtures, etc., on knocking behavior in SI engines. Additionally, this paper aims to present a systematic review of the studies conducted to investigate the effect of EGR on the knocking in SI engines. The EGR is often considered an effective means to suppress knocking in SI engines. The thermal effect of EGR in controlling the knocking is well known as EGR affects the temperature and pressure history of the combustion chamber.