Search Results

Fuel injectors capable of rapidly electrically heating ethanol for cold starts below ethanol's flash point temperature have been developed for the Brazilian transportation market. These injectors also enable the enleanment of 20°C cold start fueling, which has shown to reduce FTP bag emissions. Initial E-100 vehicular emission test results were published in SAE paper 2009-01-0615 and presented during the 2009 SAE Congress. Further development has shown that heated injector systems can enable emission reductions with a variety of automotive fuels. Engine control strategies which make use of heated injector systems, along with corresponding test results, are presented and discussed.

Ethanol is commonly employed as a transportation fuel in Brazil. However, since pure ethanol’s flash point is 12°C, flex-fuel vehicles marketed in Brazil are currently equipped with a redundant fuel system which delivers gasoline during cold starts below [typically] 18°C. Since these low temperatures are infrequently experienced in Brazil, gasoline in the auxiliary fuel tank may evaporate and/or varnish during extended dormant periods, resulting in poor quality or no-starts. It is therefore desirable to eliminate the gasoline system by vaporizing a sufficient quantity of ethanol to enable cold starts at low ambient temperatures. A port fuel injector capable of rapidly heating ethanol above its flash point has been developed which eliminates the need for the redundant fuel system. During cold-start conditions, the vehicle’s controller commands power to an electrical heater contained within each injector.