Search Results

The concept of vehicle understeer and oversteer has been well studied and equations, test methods, and test results have been published for many decades. This concept has a specific definition in the steady-state driving range as opposed to quantification in highly transient limit handling events. There have been specific test procedures developed and employed by automotive engineers for decades on how to quantify understeer. These include the constant radius method, the constant steering wheel angle/variable speed method, the constant speed/ variable radius method, and the constant speed/variable steer method. These methods are very good for calculating the understeer gradient but care must be taken in interpreting the result at the limits of tire traction since lateral tire forces can be reduced on a drive axle when significant throttle is applied.

There have been several recent articles published concerning the effect of a tire tread separation on vehicle handling, but lately the literature has been silent on the situation where a tire airs out. This paper studies how various vehicles steer and handle during and after a tire deflates while the vehicle is traveling at speed. Utility vehicles, pickup trucks, and vans were tested by deflating front and rear tires. The air out condition was created by using a special test device that fired a twelve gauge shotgun shell at the sidewall of a tire while the vehicle was traveling at freeway speeds. The vehicles were instrumented with on board video equipment and a computer with transducers to measure both driver inputs and vehicle responses during the testing. The results show that a rapid tire air out creates a slight pull to the side of the deflated tire which then requires a small corrective steer to maintain a straight ahead course.

Recreational Off Road Vehicles (ROVs) which are sometimes referred to as side-by-sides, have increased in popularity over the last decade. These vehicles are available in many different sizes and performance characteristics from a host of different manufacturers and also have a variety of different missions, just as there are many types of off road terrain. The United States Federal Government, through the Consumer Product Safety Commission (CPSC), has advocated and proposed vehicle handling and rollover resistance standards for the side-by-sides which have a top speed above 25 miles per hour (these are not defined as “low speed vehicles”). For the sake of repeatability, the proposed maneuvers are to be performed on a high friction hard surface (like asphalt) as opposed to the off road surfaces (i.e. grass, sand, dirt, mud. rocks, etc.) that these vehicles are designed to be operated on.