Search Results

The relationship between ignition, lift-off length and soot formation was investigated for a collection of fuels in an optically-accessible modified 2-stroke engine under a set of typical quasi-steady state Diesel DI conditions. Five fuels including biodiesel blends and Fischer-Tropsch fuels have been selected for their potential to substitute conventional diesel with no major modifications on the engine hardware, and were previously characterized under ambient pressure following ASTM standards. Fuels were injected into a large volume through a single-hole nozzle at three levels of injection pressure, by sweeping ambient temperatures at constant density, and ambient densities at constant temperature. The 8 ms single-shot injections were long enough to reach the stabilization of a free diffusion flame. The OH-chemiluminescence was imaged and lift-off length was measured via image post-processing.

A study was conducted to investigate the evolution of liquid phase penetration of evaporating sprays under engine-like conditions, with diesel and biodiesel fuel blends. This study has been performed in a facility based on a single cylinder two-stroke direct injection Diesel engine operating at low rotational speed which provides a quiescent thermodynamic environment around TDC, when fuel is injected, realistic for current D.I. Diesel engines. Due to the absence of inlet or exhaust valves, very easy optical access to the combustion chamber can be provided through the cylinder head. Pure nitrogen is supplied to the engine as intake gas, in order to avoid combustion. The injection event is carried out by an electronically controlled common rail system. The injector is equipped with real 8-hole nozzles, with a hole diameter of 0.115 mm. Injection pressures in this study ranged between 30 and 160 MPa and different in-cylinder peak pressure and temperature values were considered.

In the wake of the Turbulent Nonpremixed Flames group (TNF) for atmospheric pressure flames, an open group of laboratories belonging to the Engine Combustion Network (ECN) agreed on a list of boundary conditions -called “Spray A”- to study the free diesel spray under steady-state conditions. Such conditions are relevant of a diesel engine operating at low temperature combustion conditions with moderate EGR, small nozzle and high injection pressure. The objective of this program is to accelerate the understanding of diesel flames, by applying each laboratory's knowledge and skills to a specific set of boundary conditions, in order to give an extensive and reliable experimental database to help spray modeling. In the present work, “Spray A” operating condition has been achieved in a constant pressure, continuous flow vessel. Schlieren high-speed imaging has been conducted to measure the spray penetration under evaporative conditions.