Search Results

A simulation model of the single cone synchronizer is presented using the dynamic implicit algorithm with commercial Finite Element Analysis (FEA) software Abaqus. The meshing components include sleeve gear, blocking ring and clutch gear, which are all considered as deformation body. The processes mainly contain the contact between sleeve teeth and blocking teeth, meshing period and the impact of sleeve teeth and clutch gear teeth, and these nonlinear contact steps are realized with Abaqus. In addition, a shift force derives from experiment is applied to the sleeve ring, and a moment is added to the clutch gear to realize the relative rotational speed. Based on the FEA model, the effect of the varied frictional coefficients between the cone surfaces of blocking ring and clutch gear on the synchronizer time and contact stress is discussed. Variation of stresses and contact force with respect to time are evaluated from this analysis.

This paper presents the dynamic and analysis models of a typical synchronizer, which are mainly used to analyze the sensitivity of parameters of synchronizer on the gear shift performance. Because there are so many parameters namely coefficient of friction, cone angle, mean radius, blocker angle, etc, affected the synchronizer performance, which the times of experience will increase in a geometrical ratio if tested them one by one, it is almost impossible to evaluate all parameters by experience alone. Due to virtual prototype technology, the synchronizer parameterized virtual models can be built for the synchronizer studies. The parameterized virtual models of the typical synchronizers are developed with ADAMS. Then the gear shift process is simulated and analyzed for the given input parameters respectively. The models also predict the shift time and the peak of the shift force, and the model is validated by the good correlation between simulation results and test data.