Refine Your Search

Search Results

Viewing 1 to 2 of 2
Technical Paper

The Potential of Gasoline Fueled Pre Chamber Ignition Combined with Elevated Compression Ratio

2020-04-14
2020-01-0279
Pre-chamber ignition is a method to simultaneously increase the thermal efficiency and to meet ever more stringent emission regulations at the same time. In this study, a single cylinder research engine is equipped with a tailored pre-chamber ignition system and operated at two different compression ratios, namely 10.5 and 14.2. While most studies on gasoline pre-chamber ignition employ port fuel injection, in this work, the main fuel quantity is introduced by side direct injection into the combustion chamber to fully exploit the knock mitigation effect. Different pre-chamber design variants are evaluated considering both unfueled and gasoline-fueled operation. As for the latter, the influence of the fuel amount supplied to the pre-chamber is discussed. Due to its principle, the pre-chamber ignition system increases combustion speeds by generating enhanced in-cylinder turbulence and multiple ignition sites. This property proves to be an effective measure to mitigate knocking effects.
Technical Paper

Injector Design and Fuel Pressure Variation for Oxygenated Spark Ignition Fuels

2023-04-11
2023-01-0306
This study provides an overview of injector design adaptations and fuel pressure variations for oxygenated synthetic fuels, benchmarked against gasoline. The promising oxygenated fuels exhibited reduced emissions, especially with respect to particles. In gasoline engines, high fuel pressures are needed to keep the particle emissions below the permitted level. In oxygenated fuels, high fuel pressures are required to compensate for the lower volumetric energy density when used with non-adapted injectors. This study demonstrates that an adapted injector design enables engine operation with a fuel pressure reduction from 35 MPa to 10 MPa, without emission drawbacks. The fuel investigated contained dimethyl carbonate (DMC) and methyl formate (MeFo). The fuel mass contained around 50% oxygen. A relatively high percentage of 35 vol.% MeFo was chosen because of its high vapor pressure, thus providing fast mixture formation and enabling very late compression stroke injections.
X