Search Results

Manganese sulfides (MnS) are nonmetallic, ductile inclusions with high melting temperature (1610 °C) which improve the machinability and retard the grain growth in steels, in addition of contributing to avoid cracking during hot working. In this paper, the effect of manganese sulfides on the fatigue life of the vanadium micro-alloyed forging steel 38MnVS6 is discussed. Force-controlled fatigue tests are performed on small sized specimens until the crack occurs. The fatigue life of the forged material, presented by Wöhler curves, is considerably reduced at high levels of the nominal stress amplitude compared to the wrought material. Moreover, it is evident that the presence of longer and thinner particles of MnS reduces the scatter band of Wöhler curves and decreases the fatigue strength of the material. This paper presents a first attempt to find a relation between the shape and content of manganese sulfides due to the forging process and the fatigue life of the material.

The cyclic material behavior is investigated, by strain-controlled testing, of 8 mm thick sheet metal specimens and butt joints, manufactured by manual gas metal arc welding (GMAW). The materials used in this investigation are the high-strength structural steels S960QL, S960M and S1100QL. Trilinear strain-life curves and cyclic stress-strain curves have been derived for the base material and the as-welded state of each steel grade. Due to the cyclic softening in combination with a high load level at the initial load cycle, the cyclic stress-strain curve cannot be applied directly for a fatigue assessment of welded structures. Therefore, the transient effects have been analyzed in order to describe the time-variant material behavior in a more detailed manner. This should be the basis for the enhancement of the fatigue life estimation.

Fatigue testing is known to be time consuming and expensive. Therefore, it should be the main target of fatigue research to accelerate the derivation of fatigue properties. Depending on the required properties, strain- or load-controlled fatigue tests have to be performed. Carrying out load-controlled fatigue tests is necessary to derive the influence of mean stresses and notches on the fatigue strength and fatigue life of different materials and joining technologies. In the case of material samples, increasing test frequencies could be a proper way to accelerate the fatigue testing, as long as the increased test frequencies have no influence on the resulting fatigue life. In the case of strain-controlled fatigue tests, it is not possible to increase the test frequencies in order to accelerate the fatigue tests. Therefore, the Incremental Step Test, which allows the derivation of the cyclic stress-strain curve with only one test, was introduced.

To reduce the weight and to increase the power as well as to enable the utilization of nodular cast iron components, e.g. for wind turbines and heavy industry parts, locally higher stresses need to be withstood by the material. This becomes crucial, when additional overloads influence the structure of thick-walled components causing high local elastic-plastic deformations. In this case, the cyclic, elastic-plastic material behavior and its development under cyclic loading are important points to be considered during component design. To assess the material’s local elastic-plastic material behavior, strain-controlled fatigue tests were performed under alternating loading, Rε = -1, with unnotched specimens removed from cast blocks as well as from a hub and a planet carrier of wind turbines, made of EN-GJS-400-18U-LT, EN-GJS-700-2, ADI-800 and ADI-900.

For the design of thick-walled nodular cast iron components, fatigue assessment, especially in the context of local imperfections in the material, is a challenging task. Not only the cyclic material behavior of the sound baseline material, but also the cyclic behavior of materials with imperfections, such as shrinkages, dross and chunky graphite, needs to be considered during the design process of cast iron components. In addition to this, new materials, such as solid solution strengthened alloys, offer new possibilities in lightweight design, but need to be assessed concerning their fatigue strength and elastic-plastic material behavior. If a safe and reproducible fatigue assessment for any component cannot be performed and a secure usage is therefore not given, the cast components are generally rejected, leading to a loss of additional material, energy and money for recasting the component.